B72650M0151K072

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The B72650M0151K072 is a metal oxide varistor (MOV) which belongs to a family of semiconductor devices that are used to protect against transient overvoltage faults. They are also known as Transient Voltage Surge Suppressors (TVSS). MOVs are typically used in low-voltage circuit applications such as power supplies, surge protection, motor control circuits, industrial electronics, and consumer electronics.

The B72650M0151K072 has a maximum voltage rating of 420VAC and a maximum energy rating of 500 joules. It is also rated to withstand up to 75A peak surge current. The product has a clamping voltage of 324V and a peak current of 50A. It has a surge current rating of 5A (8/20 μs waveform).

The MOV works on the principle of positive temperature coefficient. This means that as the temperature increases, the resistance of the MOV increases. Therefore, when a voltage spike occurs, the MOV\'s resistance rises quickly, leading to a reduction in current flow and thus protecting the circuit components. The device also has capacitive storage, which helps absorb large current surges and dissipate them safely. This helps to protect the components from further overload.

MOVs are designed to be used in applications where there is a risk of overvoltage or excessive current. For example, when used in power supplies or other electronic circuits, MOVs can protect against overvoltage and current surges, which can cause damage to the system. MOVs are typically installed at the beginning of a circuit, so that any transient voltage or current surges are diverted away from other components and quickly dissipated.

MOVs can also be used in other types of applications, such as motor control circuits, appliance and consumer electronics, and photovoltaic systems. In these applications, MOVs act as an overvoltage protection device to protect the system from power surges and other transients. MOVs can also be used to reduce the amount of noise generated in circuits, such as those used in switching power supplies, helping to improve system performance.

MOVs have a variety of applications, and are designed to meet a wide range of customer needs. They provide an effective means of protecting circuits from transient voltage or current surges, and are suitable for use in both high and low voltage applications. By installing an MOV in an electrical circuit, it is possible to ensure that the circuit is protected from transient overvoltage and current surge conditions.

The specific data is subject to PDF, and the above content is for reference