B82442T1475J50

DC Resistance (DCR):	48.6 Ohm Max
Height - Seated (Max):	0.209" (5.30mm)
Size / Dimension:	0.220" L x 0.197" W (5.60mm x 5.00mm)
Supplier Device Package:	2220 (5650 Metric)
Package / Case:	2-SMD, J-Lead
Mounting Type:	Surface Mount
Inductance Frequency - Test:	252kHz
Operating Temperature:	--
Ratings:	AEC-Q200
Frequency - Self Resonant:	800kHz
Q @ Freq:	30 @ 252kHz
Series:	SIMID
Shielding:	Unshielded
Current - Saturation:	119mA
Current Rating:	73mA
Tolerance:	±5%
Inductance:	4.7mH
Material - Core:	Ferrite
Type:	Wirewound
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are devices used to store energy in the form of a magnetic field. An inductor is mainly composed of an inductive coil connected in series, usually made of copper or aluminum wire. Fixed inductors are typically used in radio frequency (RF) circuits and motor applications to store energy in the form of a magnetic field. The B82442T1475J50 is a fixed-inductance electrical device manufactured by EPCOS AG, a supplier of components and systems for electrical engineering and electronics. The fixed inductor features a molded housing with a dimension of 6.2mm x 5.8mm, shielded construction, a maximum working voltage of 50 volts, and a rated inductance of 1.475 µH. The maximum rated current of the device is 2.2 amps. The B82442T1475J50 is a surface mount fixed inductor that can be used in a variety of applications, such as radio communication circuits, power supplies, and DC-DC converters. The device can be used to reduce the voltage and current fluctuations in power supplies and DC-DC converters. The device helps to smooth out any variations in the voltage and current, thus achieving better power efficiency and stability.The working principle of the B82442T1475J50 fixed inductor is simple. When an alternating current is applied to an inductor, a magnetic field is generated. The magnetic field then interacts with the current, causing it to be transformed into electrical energy. This is known as inductive reactance, and the device produces a force known as inductive resistance, which opposes the flow of current. In a DC-DC converter, the goal is to transfer the power from the source to the load. This is achieved using an inductor. When the current passes through the inductor, the inductive reactance acts to reduce the output voltage. This is done by reducing the ripple voltage, which is the difference between the peak and average current in a circuit.It\'s also possible to use the B82442T1475J50 for DC-DC buck converters. The device will act as an inductor to help reduce the voltage, allowing the converter to increase the current. This is done by converting low DC input voltages into high DC output voltages. In this case, the inductor helps to maintain a steady output voltage and supports a stable output current over a wide range of operating conditions.Fixed inductors like the B82442T1475J50 are vital components in many electronic devices. Their ability to reduce voltage and current fluctuations helps ensure the stability and reliability of the entire circuit. With such a wide range of applications, the B82442T1475J50 is an ideal choice for any power supply or DC-DC converter project.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description