B82496C3479Z000

The 3479Z000 inductor, labeled as B82496C3479Z000, is a component that plays an important role in many electronic circuits. This fixed inductor is an essential part of applications including switchmode power supplies, which run off of pulses of current. In these applications, it churns out very high levels of current and better yet, its size is small.The B82496C3479Z000 inductor is a part of the 3479Z000 family, which is an unshielded wire-wound for general purpose operations. It provides a moderate level of DC resistance, low inductance tolerance of 10%, and has a temperature range of -40C to +130C. It has an operating temperature of 125C and a high self-resonant frequency, which makes it an ideal choice for a variety of applications.The working principle of the B82496C3479Z000 inductor is based on Faraday\'s law of induction. This law states that a changing magnetic flux induces a voltage in a conductor. When a current is applied to the B82496C3479Z000 inductor, a changing magnetic field is produced. This changing magnetic field induces an opposing voltage in the inductor. This induced voltage opposes the applied current in order to limit the current flowing through it. The B82496C3479Z000 inductor is designed to be frequency independent, meaning it will respond to any frequency of alternating current.The most common application for the B82496C3479Z000 inductor is as an output inductor in a DC to DC converter. An output inductor is used in place of a resistor to control the current supplied to the load. The inductor stores the energy from the current passing through it, allowing the current to be released in a controlled manner. This feature allows the device to have a much faster response time than a resistor, making it ideal for applications such as high-speed digital circuits.The inductor is also used in AC-to-DC applications. It is often used to help reduce the rate of rise of current when the AC input voltage is high. The inductor acts as a filter, limiting the rate at which current builds up. This helps reduce power supply noises, which would otherwise be generated from the power supply and circuit board.Finally, the 3479Z000 inductor is also used in power amplifiers. Here, the inductor is used to filter out power noise caused by other components in the circuit. This helps keep the signal clear and focused, providing a great output signal for the amplifier.Overall, the B82496C3479Z000 inductor is an extremely versatile component. It can be used in a variety of applications, ranging from DC to DC converters, AC-to-DC converters, and power amplifiers. Its small size and high performance make it perfect for the job.