B84142B0016R000

Power Line Filter Modules, commonly referred to as PLF, is an effective way of improving the power quality in industrial and commercial systems. The B84142B0016R000 PLF Modules are specifically designed for use in systems ranging from 50 to 600Hz operating frequencies, and are used to reduce line-to-line and line-to-ground conducted emissions, as well as to reduce conducted interference created by the AC power supply.The B84142B0016R000 is an Integrated EMI Filter (EMIF) designed for single-phase, three-wire applications. It features an enclosure with a corner-grounded terminal box that is designed to be mounted in a vertical orientation. It has two separate power input/output connections, as well as an isolated terminal that is used for grounding. The terminal box also includes a bypass connection for applications that require the filter to be operational at all times.The working principle of the B84142B0016R000 PLF Modules is based on the use of inductive and capacitive components. The inductive components act as high-frequency filters, while the capacitive components act as low-frequency filters. These components are used to reduce conducted interference caused by the AC power supply. The B84142B0016R000 filter features an external bypass switch that allows the user to choose between “filter in” and “filter out” modes. When the filter switch is in the “filter in” position, the inductive components provide the necessary high-frequency filtering, while the capacitive components provide the low-frequency filtering. Conversely, the “filter out” mode disables the inductive components and provides only the capacitive filtering.The B84142B0016R000 PLF Modules are designed to meet the stringent requirements of IEC/EN 61800-3. This standard requires that filters have a minimum conductive attenuation of EMC noise, as well as a maximum total harmonic distortion, both of which are tested in accordance with the MIL-STD 461 standard. Additionally, the filtered performance of the B84142B0016R000 PLF Modules is verified with an independent test report. The report indicates the specific performance characteristics of the filter and can be used as a reference when selecting the best filter for a given application.The application field of the B84142B0016R000 PLF Module is quite broad, and the filter is suitable for use in a variety of industrial and commercial settings. The most common applications involve electrical and electronic components, digital and analog switching systems, and even electrical drives and motors. The filter is also suitable in environments that require reliable high-power electrical supplies, such as in medical and telecommunications equipment. Additionally, the filter can be used in hazardous locations, where it serves as an effective line balancer.In conclusion, the B84142B0016R000 PLF Modules are a reliable and cost-effective solution for applications which require effective EMC compliance. The filter features an integrated bypass switch for the convenient selection of filter modes, and the performance of the filters is verified with an independent testing report that meets the requirements of IEC/EN 61800-3. The filter can be used in a variety of industrial and commercial settings, and its applications range from electrical components and digital switching systems to hazardous locations.

The specific data is subject to PDF, and the above content is for reference