B84143V0095R229

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules can be used to improve the power quality in switch-mode power supply systems, such as B84143V0095R229. It filters out electrical noise in power line so as to reduce the common mode interference in the systems. Specifically, the B84143V0095R229 employs an inductor-capacitor filter, and is best suited for PI (Pulse Width Modulation) and PFC (Power Factor Correction) applications.

The B84143V0095R229 installed in a power supply system is composed of two main parts, the filter module and the switching power supply. The filter module includes inductors, capacitors, bead-core, and common-mode chokes. Its main purpose is to attenuate electromagnetic interference and also suppress conducted high-frequency interfering noise.

In filter modules, an inductor-capacitor filter is a high-pass filter which passes current at its resonant frequency. However, impedance at lower frequencies is much greater. Therefore, it increases the amount of noise produced at those frequencies, thus allowing it to stay on the power line and then be conducted or radiated to other circuits. This noise can cause interference in the switch-mode power supply systems.

The B84143V0095R229 works by creating an electrical barrier between the power line and the switch-mode power supply system, thereby reducing the entry of noise. A filter module is designed to suppress electromagnetic noise radiation, and reduce the switching noise of the power supply. With the filter connected to the power line, the conducted interference is reduced. Additionally, by using bead-core inductors along with common-mode chokes, it also reduces the amount of common-mode interference, thus improving the power quality of the power line.

The filter module works by using the combination of inductors and capacitors, allowing the filter to pass the desired electrical signal while blocking any unwanted noise. This design allows the filter to attenuate the noise over a relatively wide frequency range, making it an ideal choice for PI/PFC applications. The filter modules also attenuate the common mode interference, which is caused by the high-frequency noise of the power supply. This reduces the risk of failure in the switch-mode power supply.

The B84143V0095R229 is designed to help in improving the power quality of switching power supplies. Through the use of inductor-capacitor filter, it blocks conducted and radiated noise from entering the system. Additionally, it reduces common-mode interference, thus increasing the overall performance of the power supply. The filter is also designed to be compact and lightweight, making it easy to install in a variety of power supply systems.

The specific data is subject to PDF, and the above content is for reference