BA12003BF-E2

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Driver
Protocol:	--
Number of Drivers/Receivers:	7/0
Duplex:	--
Data Rate:	--
Voltage - Supply:	--
Operating Temperature:	-25°C ~ 75°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.173", 4.40mm Width)
Supplier Device Package:	16-SOP
Base Part Number:	BA12003

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BA12003BF-E2 Interface - Drivers, Receivers, Transceivers

BA12003BF-E2 is a type of driver, receiver, or transceiver that is typically used in the automotive industry. It is an integrated circuit that is used in various applications such as in vehicle power system control, engine control unit (ECU), and various other automotive subsystems. It is a three-channel, low input current, non-inverting active transceiver.The BA12003BF-E2 is made up of three buffer stages, connected in series, and an additional stage that is connected to the first buffer stage. Its input current is less than 0.2 mA, which enables it to operate without the need for a booster circuit or external supply voltage. Its output current is also greater than 300 mA.One of the main features of the BA12003BF-E2 is its ability to provide active buffering, where the output voltage is increased, allowing the user to have control over the input/output current of the buffer. This reduces the power consumption of the buffer when operating under higher voltage conditions.At the input stage, the BA12003BF-E2 has an open-drain buffer. This allows the user to choose either an active high or active low input configuration. This makes the buffer suitable for a variety of applications, such as those with low voltage logic signals.The receiver section of the BA12003BF-E2 provides an interface between microcontrollers and power-electrical (PE) circuits, which simplifies the connection between the two systems. The receiver also provides an interface between the two systems, allowing the microcontroller to control the PE circuit, while also providing feedback to the microcontroller.At the output stage, the BA12003BF-E2 has a non-inverting active transceiver that can be used to drive different types of output loads. It is designed for active low or active high logic outputs and can be used for driving LEDs or other power devices, such as relays, motor drives, and batteries.In summary, the BA12003BF-E2 is an integrated circuit that is used in the automotive industry for various applications including power system control, engine control units, and various automotive subsystems. It is a three-channel, low input current, non-inverting active transceiver that has an open drain buffer. It also provides an interface between microcontrollers and power-electrical circuits and can provide active buffering to control input/output current. It is suitable for a variety of applications and can be used for driving different types of output loads.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description