| Allicdata Part #: | BB-SD-25B-12-ND |
| Manufacturer Part#: |
BB-SD-25B-12 |
| Price: | $ 49.07 |
| Product Category: | Power Supplies - External/Internal (Off-Board) |
| Manufacturer: | B&B SmartWorx, Inc. |
| Short Description: | DC/DC CONVERTER 12V 25W |
| More Detail: | N/A |
| DataSheet: |  BB-SD-25B-12 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 44.61030 |
| Voltage - Output 4: | -- |
| Approvals: | CE |
| Size / Dimension: | 3.90" L x 3.82" W x 1.42" H (99.0mm x 97.0mm x 36.0mm) |
| Mounting Type: | Chassis Mount |
| Operating Temperature: | -10°C ~ 60°C (With Derating) |
| Efficiency: | 75% |
| Applications: | ITE (Commercial) |
| Voltage - Isolation: | 1.5kV |
| Power (Watts): | 25W |
| Current - Output (Max): | 2.1A |
| Series: | SD-25 |
| Voltage - Output 3: | -- |
| Voltage - Output 2: | -- |
| Voltage - Output 1: | 12V |
| Number of Outputs: | 1 |
| Voltage - Input (Max): | 36V |
| Voltage - Input (Min): | 19V |
| Type: | Enclosed |
| Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are often employed in applications requiring higher energy than what a single source can provide. They are used to step down, step up, or to convert the voltage and current levels and to provide electrical isolation. One of these converters is the BB-SD-25B-12, a single-output isolated type capacitor-input full-bridge rectifier.
The BB-SD-25B-12DC-DC converter is a 25A dc output power, 12V DC output voltage and three-terminal device. It is suited for a variety of applications including regulating input voltage, controlling voltage ripple, and powering circuits requiring precise voltage and current levels. It is suitable for use in a wide range of industrial, consumer, and automotive applications. The BB-SD-25B-12DC-DC converter is an industry-standard surface mount, which is simple to install and configure. The device is provided with protection from overload, over current, and short-circuit conditions.
The BB-SD-25B-12DC-DC converter works by rectifying a full-wave bridge circuit with an input capacitor. The output of the bridge is then smoothed and filtered by an LC filter. The output from the filter is then sent to the voltage regulator. The voltage regulator maintains a precise output voltage and adjusts the output current, depending on the load demand. The focus is on the low voltage, high power output applications that require precise voltage control.
The capability of BB-SD-25B-12DC-DC converter is suitable for a variety of applications. Depending upon the application, the output voltage and current level can be set using various control methods. This includes pulse-width modulation, voltage mode control, and switching frequency modulation. In addition, the device can provide precise voltage and current levels without external compensation and can be used to drive capacitive and inductive loads.
The BB-SD-25B-12DC-DC converter is a reliable, cost-effective solution for precise voltage and current regulation. It is easy to install, configure, and maintain, making it a great choice for a wide variety of applications. It is suitable for controlling voltage ripple in motor drives, powering sensitive circuits, and regulating input voltage.
The specific data is subject to PDF, and the above content is for reference
DC/DC CONVERTER 24V 1500W
DC/DC CONVERTER 48V 576W
DC/DC CONVERTER 12V 850W
DC/DC CONVERTER 12V 10W
DC/DC CONVERTER
DC/DC CONVERTER 12V 1100W