BCM3814V60E10A5T02

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are electronic devices that convert one type of electrical power (or “voltage”) to another. They are often used to convert an unregulated voltage (such as a car battery) to a reliable, regulated voltage that can be used to power equipment, or to provide a reliable source of power when in an area without electricity. The BCM3814V60E10A5T02 is a DC-DC converter designed to satisfy a variety of power requirements. It is a high-performance, high-efficiency, half-bridge-type DC-DC converter with a wide input voltage range of 4.95 to 30VDC, and a wide output voltage range of 1.00 to 15VDC.

The BCM3814V60E10A5T02 provides up to 60A output current, switching up to 15V output voltage with high efficiency and enhanced short-circuit protection. It can also be used in applications requiring both positive and negative output voltages, as it is designed to be connected in either a “half-bridge”, or “full-bridge” configuration. Its fast response time and low-noise operation allow for smooth operation even under demanding conditions. It is also designed for high reliability with lower EMI levels.

The BCM3814V60E10A5T02 has a wide range of applications. It can be used in a variety of industrial and automotive applications, such as baseband converters, backlight inverters, battery chargers, power supplies, and electric vehicle chargers. This DC-DC converter is also commonly used in consumer electronics, and in medical equipment. It can also be used to provide power for telecommunications networks, and in lighting systems.

The working principle of the BCM3814V60E10A5T02 is based on the principle of an inductive power conversion. The device is designed to be driven by a high frequency, low-loss, current controlled oscillator which in turn regulates the switching frequency. The switching frequency is selected in order to minimize the output ripple of the power conversion. The switching frequency is typically between 50kHz and 500kHz in order to maximize the energy efficiency of the device.

The BCM3814V60E10A5T02 consists of a high-efficiency synchronous rectifier and a power MOSFET switch. This combination significantly reduces the losses and improves the efficiency of the converter. The power MOSFET switch is configured to provide an accurate current limit value, which can be adjusted by an external resistor. The synchronous rectifier is based on an advanced high-voltage driver and a synchronous MOSFET for low on-state resistance which provides high efficiency and fast switching speeds. The power MOSFET switch also provides over-voltage and over-current protection.

The DC-DC converter is also designed for thermal regulation. Its thermal regulation system includes a dedicated thermal pad which monitors the temperature and provides the necessary temperature compensation. In order to prevent the device from overheating, there are several temperature-independent thermal shutdown circuits which shut off the device when the temperature exceeds a specific limit.

In conclusion, the BCM3814V60E10A5T02 is a high-performance, high-efficiency, half-bridge-type DC-DC converter with a wide input voltage range and a wide output voltage range. It can be used in a variety of industrial and automotive applications, as well as in consumer electronics and medical equipment. Its advanced synchronous rectifier, power MOSFET switch, and over-voltage and over-current protection ensures high efficiency and low losses. The DC-DC converter is designed for thermal protection and temperature regulation. It is ideal for applications requiring reliable and precise power conversion with fast response times and low noise operation.

The specific data is subject to PDF, and the above content is for reference