BK/C520-750-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are used in a variety of ways in commercial, industrial and domestic applications around the world. This article focuses on the application field and working principle of a particular type of fuse, the BK/C520-750-R.

In its basic form, the BK/C520-750-R is an industrial fuse that is designed to protect electrical circuits from being damaged due to over-amperage. This type of fuse is commonly used in electrical circuits to protect motors, transformers, and other electronic components from damage caused by too much current. This protection allows for proper operation of the equipment, as water as reduces the risk of fire.

The BK/C520-750-R is a midget plug-in or screw-in type of fuse, and it is made of ceramic material with a zinc or silver plated base, and a copper alloy element inside. It is designed to open the circuit when it is overloaded, and reset itself when the overload ceases. This ability distinguishes it from other common fuses, such as fast-acting fuses, which must be replaced after every trip. The maximum current rating of BK/C520-750-R is 500A, and its operating temperature is -40 °F to 185 °F (−40 °C to 85 °C).

This type of fuse has a number of applications. It is commonly used as a service disconnect fuse in industrial control panels. It is also used in machine tools, motors, and other heavy load equipment. It can be used to protect motor and transformer windings from starting current and transient overload, while allowing higher levels of continuously running current.

The working principle of the BK/C520-750-R is relatively simple. When an overload occurs, the current passes through the fuse element, which begins to heat up. At a certain temperature, the fuse element melts, creating an open circuit which interrupts the power supply. The melted fuse element is designed to remain in the open circuit position, thus preventing the current from being restored to the circuit.

Once the overload is removed, the fuse element can be replaced with a new one. This process is usually done by an electrician, as it requires skilled technical knowledge. It is important to note that the fuse must be replaced with the same one each time; using a different fuse can cause the circuit to operate at an unsafe level.

The BK/C520-750-R is a versatile and reliable fuse for many different applications, and it is widely used in industrial, commercial, and domestic settings. Its intelligent design enables it to protect circuits from over-ampage, and reset itself when all is well, without needing to be replaced each time.

The specific data is subject to PDF, and the above content is for reference