Allicdata Part #: | 283-3797-ND |
Manufacturer Part#: |
BK/FTM |
Price: | $ 1.39 |
Product Category: | Circuit Protection |
Manufacturer: | Eaton |
Short Description: | KNOB FOR HTB HOLDER 5MM FUSE |
More Detail: | N/A |
DataSheet: | BK/FTM Datasheet/PDF |
Quantity: | 432 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 1.26630 |
5 +: | $ 1.20456 |
10 +: | $ 1.14345 |
50 +: | $ 0.92308 |
100 +: | $ 0.78259 |
250 +: | $ 0.76250 |
500 +: | $ 0.64210 |
1000 +: | $ 0.57187 |
5000 +: | $ 0.50164 |
Series: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Accessory Type: | Knob - Black |
Moisture Sensitivity Level (MSL): | -- |
For Use With/Related Products: | Fuseholder; HTB |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Network administrators and engineers often rely on network devices and accessories to maintain an optimal performance. One such accessory they may use to benefit their system is a BK/FTM (Broadband Klystrons/Fiber-Tuned Modulators).
A BK/FTM is a device that is used to reduce the amount of noise the system produces and to increase the data transfer rate. It serves as a bridge between the output of the network adapter and the cable or fiber optic cable line. The BK/FTM is able to reduce the noise that would otherwise interrupt the signal flow from one device to another.
The BK/FTM is made up of two pieces: the base unit, which contains the modulator, and the terminal unit, which is connected to the fiber optic cable line. The base unit is connected to the source of data, such as the network adapter. When the signal from the network adapter is picked up by the modulator, it converts the signal to an analog signal, which is then sent down the fiber optic cable line.
The base unit is also responsible for controlling the signal flow and ensuring that it is within the acceptable range prescribed by the bandwidth requirements of the system. The control signals are sent to the terminal unit, which then converts them back to a digital format and sends them down the cable or fiber optic cable line. The signal is then received on the other end of the connection, where it is converted back to its original digital format.
One advantage of using a BK/FTM is that it is able to reduce system noise, which can help to improve overall performance. As the signal travels through the system, the noise level decreases, resulting in less interference and fewer dropped data packets. This helps ensure that the data can be transferred in an uninterrupted and reliable fashion.
A BK/FTM can also be used to increase the data rate at which data is sent over the network. By using a higher frequency radio signal, the data transmission rate can be increased significantly. This helps to ensure that the data can be transferred quickly and without any interruptions.
BK/FTMs are an important tool for network administrators and engineers. By using these devices, they can ensure optimal performance of their systems and can reduce the amount of system noise. In addition, they can increase the data rate, allowing for faster and more reliable data transmissions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
C310T-2-R-BKF | Eaton | 0.0 $ | 1000 | FUSE CERAMIC 2A 250V AXIA... |
RX720PL,BKFOAM | Serpac | 0.0 $ | 1000 | CASE KJW BLACK 20.05"L X ... |
RX720ML,BKFOAM | Serpac | 0.0 $ | 1000 | CASE KJW BLACK 20.05"L X ... |
RX520PL,BKFOAM | Serpac | 0.0 $ | 1000 | CASE KJW BLACK 15.11"L X ... |
RX520ML,BKFOAM | Serpac | 0.0 $ | 1000 | CASE KJW BLACK 15.11"L X ... |
RX300PL,BKFOAM | Serpac | 0.0 $ | 1000 | CASE PVC BLACK 10.9"L X 9... |
RX300ML,BKFOAM | Serpac | 0.0 $ | 1000 | CASE PVC BLACK 10.9"L X 9... |
RX120PL,BKFOAM | Serpac | 0.0 $ | 1000 | CASE PVC BLACK 7.59"L X 8... |
RX120FMLL,BKFOAM | Serpac | 0.0 $ | 1000 | CASE PVC BLACK 7.59"L X 8... |
CIRC BRKR MODULE
FUSE DISPLAY RACK
BASE ELEMENT TYPE 2 ARRESTERS
FEL/SIL CARRIER 5X20 IP 40
FEL/SIL CARRIER 5X20 IP 40
FEL/SIL CLEAR CAP-36V