Allicdata Part #: | BK/GDC-V-630MA-ND |
Manufacturer Part#: |
BK/GDC-V-630MA |
Price: | $ 2.56 |
Product Category: | Circuit Protection |
Manufacturer: | Eaton |
Short Description: | FUSE GLASS 630MA 250VAC 5X20MM |
More Detail: | N/A |
DataSheet: | BK/GDC-V-630MA Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
100 +: | $ 2.32628 |
Package / Case: | 5mm x 20mm (Axial) |
DC Cold Resistance: | 0.186 Ohms |
Size / Dimension: | 0.218" Dia x 0.831" L (5.54mm x 21.10mm) |
Color: | -- |
Operating Temperature: | -- |
Approvals: | cULus, IMQ |
Melting I²t: | 1.33 |
Breaking Capacity @ Rated Voltage: | 35A |
Mounting Type: | Through Hole |
Series: | GDC |
Response Time: | Slow |
Voltage Rating - AC: | 250V |
Current Rating: | 630mA |
Fuse Type: | Cartridge, Glass |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Fuses protect circuits and components from power surges, allowing current up to a certain maximum level. The BK/GDC-V-630MA fuse is an AC-rated fuse typically rated for 125 vac, 200 kA interrupting rating, and a maximum of 30 vdc. It is used in several applications where it is important to prevent damage from power surges.
The BK/GDC-V-630MA is most commonly found in consumer electronics and computers, where it is used to protect components from electrical surges. It can also be found in power supplies, water heaters, electric motors, and other small electronic devices. The low maximum current capacity of the fuse allows it to protect sensitive components from damage without interrupting normal operation.
The BK/GDC-V-630MA fuse features a time-delay characteristic, meaning that it will not blow immediately when a surge or overload of current is present. This allows the fuse to act as a temporary safety measure before it trips and cuts the power. This type of fuse will often take several cycles of overcurrent before it trips, allowing enough time for a circuit breaker or another overcurrent-protection device to react.
The fuse\'s components are laid out as follows: a metal base acts as a conductor and supports two identical contacts connected at the midpoint. These contacts act as the load-carrying portion of the fuse, allowing current flow to the load when the contacts are closed. When the current load exceeds the fuse\'s current rating, the contacts heat up and expand, separating to break the circuit and prevent further current from flowing.
The BK/GDC-V-630MA is also commonly used in combination with other protective devices such as spark gap protection, current/voltage supplies, and ground fault circuit interrupters. The combination of these devices helps to ensure that a surge of current does not exceed the fuse\'s current rating. This helps to protect sensitive electronic components from potential damage in the event of a power surge.
To ensure that the BK/GDC-V-630MA is safe to use in a given application, it is important for it to be selected correctly to provide the level of protection required. The fuse should be sized properly to meet the application\'s current requirements and should only be combined with other protective devices that are designed to work in harmony with the fuse. This will ensure that the fuse is able to provide the best possible protection against power surges.
The specific data is subject to PDF, and the above content is for reference
FUSE BRD MNT 1.6A 125VAC/VDC SMD
FUSE BOARD MNT 3.15A 125VAC/VDC
FUSE BOARD MNT 350MA 125VAC/VDC
FUSE BRD MNT 2.5A 125VAC/VDC SMD
FUSE BRD MNT 1.6A 125VAC/VDC SMD
FUSE BOARD MNT 1A 250VAC RADIAL