BK/GLR-10

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BK/GLR-10 fuses are non-current limiting fuses and belong to the category of electrical, specialty fuses. Characterized by their electrical, thermal and mechanical properties, these fuses are reliable, robust, and have been optimally designed to accept UPS, inverter, motor control, power control equipment, and transformer applications.

BK/GLR-10 fuses behavior like a conventional electrical switch, providing a means of short-circuit/overload protection. When the current in the BK/GLR-10 fuse exceeds the current rating of the fuse (or the \'amp rating\'), a ribbon of metal vaporizes, breaking the circuit. This metal vaporization causes a time delay before the current is fully disconnected, long enough for the connected equipment to be safely and automatically shut down. This is especially helpful in case of short circuits and overloads, where sudden disconnection of the power can cause disruption and damage to the connected equipment.

BK/GLR-10 fuses are available in a wide range of sizes, from 0.25 amperes to 25 amperes. Typically, 20mm x 5mm fuses are most common. Depending on the conditions, the fuses can be made to record a multi-time current-carrying capacity, ranging from 0.25 to 1 amperes, 4 to 8 amperes and 8 to 16 amperes.

One of the main advantages of BK fuses is that they offer robust protection against short-circuit and overload protection compared to other fuses. The BK/GLR-10 fuse also comes with a built-in safety feature that prevents these fuses from becoming too hot. The thermal fuse detects and shuts off when the temperature rises, preventing the fuse from becoming permanently burnt out. They also have a low breaking capacity, making them suitable for circuit protection with small loads.

The BK/GLR-10 fuses come pre-wired, making installation and setup easy. Simply clip the fuse into place and the circuit is ready to go. All BK/GLR-10 fuses are UL approved, so it is important to use a UL-approved fuse in the circuit.

BK/GLR-10 fuses must be sized correctly to protect the circuit, and should be inspected regularly to ensure they are working properly. To prevent damage, it is important to replace the fuse with the same rating as the original. If the size of the fuse is too large, the fuse will overheat; if the fuse is too small, the fuse will blow too quickly. It is also important to make sure that the circuit is correctly wired before adding the fuse.

In conclusion, the BK/GLR-10 fuse is a high-quality specialty fuse that provides reliable and robust protection against short circuits and overloads. It is an ideal choice for UPS, inverter, motor control, power control equipment, and transformer applications due to its wide range of current-carrying capacities and safety features. Additionally, the BK/GLR-10 fuses are easy to install and maintain and come with a UL-approved rating.

The specific data is subject to PDF, and the above content is for reference