BK/HPS2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

BK/HPS2 fuseholders are designed for use in both industrial and consumer applications. The holders are available in two designs; one with a solid body for use in heavy-duty circuits and one with a spring-loaded body for use in consumer devices. The construction of the holders consists of a base, a conductor plate, and an insulating body.

The base is typically made from plastic, although other materials such as aluminum or brass may be used. The base contains the contact points where the fuse is inserted. The conductor plate is solid and serves as a bridge between the base and the insulating body. The insulating body serves to provide an insulating barrier between the current flow and the fuseholder.

BK/HPS2 fuseholders are designed for use in both AC and DC circuits. The AC current flows through the holder from one conductor plate to the other, while the DC current travels through the holder in a single direction. The ratings and approvals on BK/HPS2 fuseholders vary based on the manufacturer and the application.

The working principle of the BK/HPS2 fuseholders is based on the principle that an electrical current flows when it is offered a path of least resistance. When the current passes through the holder, it encounters resistance at the conductor plates. This resistance causes the holder to heat up, which in turn causes the fuse to blow. The current is dissipated before it reaches the load, thus protecting the circuit from damage.

BK/HPS2 fuseholders are designed to provide reliable protection against over current and short circuit conditions. They are available in a variety of ratings and are UL listed and CSA certified for safety and performance. The holders have been tested for performance in a number of difficult conditions and have proven to be reliable and long lasting.

BK/HPS2 fuseholders can be used in a variety of applications including residential, commercial, and industrial installations. These holders are ideal for protecting circuits from high currents, as well as providing surge protection for sensitive electronic devices. The fuseholders can be used in liquid-filled or air-filled circuits, depending on the type of protection required. BK/HPS2 fuseholders are designed to provide reliable, safe, and long lasting protection for both industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference