BK/PCC3/41J0375

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are one of the oldest and most well-known protection devices. Used in a variety of electrical applications, fuses are electrical components designed to protect circuits from short circuits, electrical overcurrent, or arcing. One of the most common fuses is the BK/PCC3/41J0375.

The BK/PCC3/41J0375 is a fast-acting fuse, designed to protect small electronic devices from a short circuit or other dangerous electrical condition. It is rated to 10 A and has a time-delay of 10 seconds, allowing for a faster response to overloads. It also has a nominal interrupting rating of 500 A, meaning it can safely handle an overload up to 500 A.

The BK/PCC3/41J0375 is used in a variety of applications, especially in computer hardware, such as motherboards or drives. The fuse is typically placed near the power cable, and should be checked periodically to ensure it is still working properly. If the fuse is blown, it\'s usually a sign of a short circuit or power overload, and should be replaced as soon as possible.

The working principle of the BK/PCC3/41J0375 is relatively simple. The fuse is composed of two metal strips connected in a circuit. When power is applied to the fuse, the two strips will heat up. If the current passing through the fuse is too high, the strips will become too hot and melt, breaking the circuit and preventing any further current from flowing. This will effectively protect the device or circuit in which the fuse is placed.

In summary, the BK/PCC3/41J0375 is a fast-acting fuse designed to protect small electronic devices from short circuits or other dangerous electrical conditions. It is rated to 10 A and has a time-delay of 10 seconds, allowing for a faster response to overloads. It is used in a variety of applications, especially in computer hardware, such as motherboards or drives. The working principle of the fuse is relatively simple – the two metal strips within it heat up when power is applied. If the current passing through the fuse is too high, the two metal strips will become too hot and melt, breaking the circuit and preventing further current from flowing.

The specific data is subject to PDF, and the above content is for reference