BK1/TDC11-1.5-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are devices that contain a small piece of metal that melts when an electric current, which is too high or too much for the circuit, flows through it. BK1/TDC11-1.5-R is a type of fuse used for protecting circuits against excessive currents. It is designed to work in different conditions, providing protection for low-voltage and high-voltage circuits.

The BK1/TDC11-1.5-R is a single-pole slow-blow time-delay fuse operated by an internal metal wire. It is rated at a current of 1.5 Amps and can be wired to the circuit between a power source and a load. The BK1/TDC11-1.5-R is designed to protect circuits from over currents by limiting the amount of electrical flow in the circuit. The fuse must be sized according to the maximum current expected in the circuit to effectively protect the circuit from overcurrents.

The operating principle of the BK1/TDC11-1.5-R is that when a current higher than its rating flows through the circuit, the internal wire element of the fuse will take a longer amount of time than normal to heat up and eventually melt. This long-delay characteristic allows a certain amount of current to pass through the circuit before the fuse trips, unlike the instantaneous-action fuse, which will trip immediately when a high current is detected. This makes the BK1/TDC11-1.5-R suitable for use in circuits where inrush current or normal motor starting currents may exist.

The BK1/TDC11-1.5-R can be used in a wide range of applications, ranging from medical equipment to industrial machinery. It can be used to provide protection in low-voltage and high-voltage circuits. It can be installed in domestic, commercial and industrial electrical circuits. It is commonly used in AC power circuits, such as control cabinets and process control devices, as well as DC power circuits, such as medical equipment power supplies and lighting systems.

In short, the BK1/TDC11-1.5-R is a type of time-delay fuse that is used to protect circuits from excessive current and is suitable for use in a wide range of applications. It is designed to provide circuit protection by using an internal metal wire element that melts when an over-current is detected in the circuit. It has the advantage of a longer delay time than instantaneous-action fuses, which allows for greater protection in circuits where inrush currents or normal motor starting currents may exist.

The specific data is subject to PDF, and the above content is for reference