BK1/TDC11-150MA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fuses are a form of protection used in electrical circuits. They are designed to prevent circuits from being damaged due to overcurrent or short-circuit conditions by interrupting the circuit when the maximum current rating is exceeded. The BK1/TDC11-150MA fuse is a fast-acting fuse used to protect thin-film capacitor circuits and other circuits from short-circuit current caused by overload, short-circuits, and other faults.

The BK1/TDC11-150MA fuse has a breaking rating of 148V and a breaking point of 0.072 ohms. The temperature range for this fuse is -55°C/-67°F to 125°C/257°F. It has a rated voltage of 300VAC, an interrupting rating of 1000A at 300VAC, and a voltage drop of 0.25%. The BK1/TDC11-150MA fuse is UL, CE, and TUV approved and complies with IEC, CSA, and UL standards.

The BK1/TDC11-150MA fuse is available in various package sizes such as the 1206, 1812, and 2412 sizes. It is also available in a DIP type package for PCBs. It is designed to be used in a variety of applications, including thin-film capacitor circuits, DC/AC inverters, and other electrical circuits.

The main purpose of the BK1/TDC11-150MA fuse is to protect circuits from unwanted electrical stresses, such as overcurrent, short-circuits, and other issues. This fuse is designed to open up in the event of an overcurrent or short-circuit condition, thereby interrupting the circuit and preventing further damage. In the event of an overcurrent, the fuse will open in less than 0.1 seconds, and the circuit is quickly disabled.

The BK1/TDC11-150MA fuse can also be used in circuits requiring a low-voltage control. It is designed to limit the current level of any device powered by a battery or other DC power source. The BK1/TDC11-150MA fuse is also suitable for use in AC circuits and can be used to protect digital equipment, such as computers, from electrical surges.

The BK1/TDC11-150MA fuse can also be used as a current limiter. It is designed to limit the amount of current passing through a circuit. This allows the circuit to function properly without causing any damage. The fuse can also be used to protect circuits from power surges. If the voltage level exceeds its rated limit, the fuse will open up and the circuit will be effectively disabled.

The BK1/TDC11-150MA fuse is a fast-acting fuse designed to protect electrical circuits from damage due to overcurrent and short-circuit conditions. It is a UL, CE and TUV approved fuse and is suitable for use in a variety of applications, such as thin-film capacitor circuits, DC/AC inverters, and other electrical circuits. The fuse is designed to open up in less than 0.1 seconds in the event of an overcurrent or short-circuit condition, thereby preventing further damage to the circuit. It is also suitable for use in circuits requiring low-voltage control, and can be used as a current limiter or to protect circuits from power surges.

The specific data is subject to PDF, and the above content is for reference