BK2125HS601-TV Filters

Series:	BK
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Filter Type:	--
Number of Lines:	1
Impedance @ Frequency:	600 Ohms @ 100MHz
Current Rating (Max):	500mA
DC Resistance (DCR) (Max):	300 mOhm
Ratings:	AEC-Q200
Operating Temperature:	-55°C ~ 125°C
Package / Case:	0805 (2012 Metric)
Mounting Type:	Surface Mount
Height (Max):	0.041" (1.05mm)
Size / Dimension:	0.079" L x 0.049" W (2.00mm x 1.25mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips

Ferrite beads and chips are a type of electrical component that often falls into the category ofradio frequency interference (RFI). Ferrite chips and beads generally contain a ferrite core made from a ceramic material and an inductive winding or wire wound around it. These components are used to block unwanted radio signals from entering a circuit, a device, or an appliance. The BK2125HS601-TV is a ferrite chip with a radio frequency interference blocking rating of 6MHz. This chip is generally used in a wide range of applications, such as automotive electrical systems, consumer electronics, telecommunications, medical equipment, and smart home appliances. It can be used to help reduce the amount of noise and interference from radio frequencies that may interfere with the signals and operations of the system or device.The BK2125HS601-TV ferrite chip works on the principle of electromagnetic induction. In a simple explanation, the winding of wire around the ferrite core creates an inductor circuit that acts as a transformer, cutting off radio frequencies that are above a certain threshold. The inductor only blocks out frequencies above the designated frequency, while allowing frequencies below the designated frequency to pass through.The ferrite core can have a variety of shapes, and can come in several varieties, such as toroidal, encased, hollow or flat. The number of windings around the ferrite core also tells how well the device performs in terms of blocking certain frequencies. The higher the number of windings, the better the immunity to certain radio frequency interference. The advantages of using ferrite chips and beads over other noise suppression devices are that they are relatively low cost, easy to install, and are generally highly efficient in terms of blocking noise and interference from radio frequencies. They can be used to reduce noise and interference from radios, mobile phones, and other electronic equipment, and provide a significant cost saving to the customer. In conclusion, the BK2125HS601-TV ferrite chip is a common type of electrical component used for noise suppression and interference rejection on a wide variety of applications. The chip works by inductively blocking radio frequencies above a certain threshold, while allowing frequencies below the designated frequency to pass through. The advantages of using ferrite chips and beads are the low cost, easy installation, and general efficiency in terms of noise suppression.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description