BLM03HD182FZ1D Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite beads and chips are usually found in the form of inductors and reactors and are used to suppress noise from the circuitry. The BLM03HD182FZ1D is a ferrite chip bead that can filter out noisy voltages and suppress common-mode noise. It has a wide variety of applications due to its high reliability and precision.

The BLM03HD182FZ1D chip bead is mainly used for common-mode noise suppression. It is able to reduce noise on the power lines and reduce the interference between power lines. The BLM03HD182FZ1D chip bead is often used in power splitters, power supplies, DC-DC converters, and other power related circuits. It is also used in audio equipment, intercoms, and digital systems to reduce unwanted noise.

The BLM03HD182FZ1D chip bead has a wide range of operation. It can operate at a wide range of frequencies, spanning from 10kHz to 10GHz. It also has a wide inductor impedance range of 25Ω to 250Ω. This allows it to be used in various types of circuits, from low-impedance circuits to high-impedance circuits. The chip bead also has high insulation resistance and a maximum temperature range of -20°C to 120°C.

The working principle of the BLM03HD182FZ1D chip bead is simple yet effective. It works by filtering out the undesirable currents and voltages on the power lines before they can be measured by the electrical equipment. The chip bead induction consists of two coils that are connected together in series, and the two windings are wound in opposite directions.

When the voltage is applied to the chip bead, it creates a magnetic field around the two coils. The magnetic field causes the current in the coils to be reversed, which sets up a current loop. This loop momentary stores the magnetic field from the voltage, allowing for the current to be accurately measured. The chip bead ensures that the unwanted voltage and current is filtered out, and only the clean power is sent to the electrical components.

The BLM03HD182FZ1D chip bead is a reliable and precise chip bead that is used in a variety of applications. It has a wide operating range and high insulation resistance, allowing it to be used in low and high impedance circuits. The chip bead works by filtering out the undesirable currents and voltages on the power lines and storing the magnetic field from the voltage, which allows for accurate current measurement.

The specific data is subject to PDF, and the above content is for reference