BMD-301-A-R RF/IF and RFID |
|
| Allicdata Part #: | 1604-1008-2-ND |
| Manufacturer Part#: |
BMD-301-A-R |
| Price: | $ 4.73 |
| Product Category: | RF/IF and RFID |
| Manufacturer: | Rigado, Inc. |
| Short Description: | BLUETOOTH LOW ENERGY 4.2 MODULE |
| More Detail: | N/A |
| DataSheet: |  BMD-301-A-R Datasheet/PDF |
| Quantity: | 7000 |
| 1000 +: | $ 4.29843 |
| Serial Interfaces: | I²C, I²S, SPI, UART |
| Package / Case: | Module |
| Operating Temperature: | -40°C ~ 85°C |
| Mounting Type: | Surface Mount |
| Current - Transmitting: | 12mA |
| Current - Receiving: | 17mA |
| Voltage - Supply: | 1.7 V ~ 3.6 V |
| Memory Size: | 512kB Flash, 64kB RAM |
| Utilized IC / Part: | nRF52832 |
| Antenna Type: | Not Included, U.FL |
| Series: | BMD-300 |
| Sensitivity: | -96dBm |
| Power - Output: | 4dBm |
| Data Rate: | 2Mbps |
| Frequency: | 2.4GHz |
| Modulation: | GFSK |
| Protocol: | Bluetooth v4.2 |
| RF Family/Standard: | Bluetooth |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF Transceiver Modules are pieces of technology that enable the transmission of signals over the air at a specific radio frequency. The BMD-301-A-R is an example of such a transceiver module. It has a wide range of practical applications and its working principle is relatively simple.
The BMD-301-A-R is used in a variety of systems, such as wireless local area networks (WLANs), cordless telephones, radio frequency identification (RFID) systems and Bluetooth networks. It is a component of the radio signal pathway, enabling it to carry the signal from the source to the destination. The transceiver module is designed to operate over a certain range of frequencies, typically from 2.4 to 2.485 GHz. This allows for the transmission of digital data in an efficient and reliable manner.
The working principle of the BMD-301-A-R involves the conversion of analog signals to digital ones, which can then be transmitted over the air as a radio wave. The process begins by converting the analog data into a form suitable for transmission. This is achieved by sampling the signal and assigning the data a numerical value, either “1” or “0”. This then is encoded into a signal using a method known as modulation. The signal is modulated so that the digital data can be transmitted wirelessly at a specific frequency range.
Upon reaching the receiver, the signal undergoes a process known as demodulation. This is essentially the reverse of the modulation process, involving the conversion of the digital signal back into an analog one. The analog signal is then used to reconstruct the original data, enabling it to be understood by the receiving device.
The BMD-301-A-R is an example of a transceiver module that has a wide range of applications, from WLANs to Bluetooth, as well as RFID systems. It works by converting analog data into digital signals, which are then modulated before being wirelessly transmitted. Upon reaching the receiver, the digital signal is then demodulated, enabling the data to be reconstructed. This powerful transceiver module is an important component in many systems, ensuring reliable and efficient wireless transmission of data.
The specific data is subject to PDF, and the above content is for reference
2.4GHz transceiver, 64MHz Arm Cortex M4F...
ENET-ZBP113 ZIGBEE MODULE
RF TXRX MODULE ISM>1GHZ U.FL ANT
RF TXRX MOD BLUETOOTH/WIFI U.FL
RF TXRX MOD CELLULAR/NAV U.FL
RF TXRX MODULE ISM ...