BP/FRN-R-30

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The BP/FRN-R-30 fuse is an electrical specialty fuse designed to control short circuit current in electrical systems. It is commonly used in applications such as residential, commercial and industrial electrical systems. It is rated for 30 amperes (A) and is generally referred to as a 30A fuse.

The BP/FRN-R-30 fuse is designed as a time-delay fuse to provide short circuit protection. The time-delay aspect of the fuse means that it will allow current to flow through a circuit for a period of time before it trips. This time-delay feature is important in avoiding accidental tripping due to temporary high-current drawn by motors and other high-inrush circuits. The time-delay feature also provides protection against a short circuit that occurs too quickly for a circuit breaker to trip.

The BP/FRN-R-30 fuse is a non-renewable fuse. This means that once the fuse is blown, it must be replaced with a new one as it cannot be reset. It also means that the fuse must be selected with a sufficient interrupting rating to ensure that the system is protected against long-duration or particularly high short circuit current.

The BP/FRN-R-30 fuse is constructed with a cylindrical body made up of two halves. One of the halves contains a metal tube or element, which is connected to a terminal at one end and is filled with a substance that melts in the presence of heat. The other half contains a plastic housing with a spring-loaded plunger that pushes down on the metal element. The metal element is in contact with the plunger when the fuse is in the normal operating position and is pushed away from the plunger when the fuse blows.

The BP/FRN-R-30 fuse works by storing electrical energy in the form of heat. When a short circuit occurs, current passes through the metal element and heats the substance in the element. If the short circuit continues, the substance melts, allowing the plunger to push away the metal element and open the circuit.

The BP/FRN-R-30 fuse is specifically designed to meet the Underwriters Laboratories (UL) standard rating. This rating is determined by the fuse’s ability to interrupt the current flow at a given voltage and for a given time. It is also tested for resistance to vibration, moisture, and corrosion.

For most applications, the BP/FRN-R-30 fuse should be connected to an appropriate circuit breaker or other over-current protection device. This provides additional protection to the fuse in case of an overload. The circuit breaker should be chosen carefully to ensure that it complements the time-delay characteristics of the fuse.

The installation of a BP/FRN-R-30 fuse is very important for the safety of both the users and the equipment. It should be installed in a well-ventilated area where it will not be exposed to direct sunlight. The fuse should be placed as close as possible to the load and should be kept away from other electrical components.

In conclusion, the BP/FRN-R-30 fuse is an electrical specialty fuse designed to control short circuit current in electrical systems. It is rated for 30 amperes (A) and is a non-renewable, time-delay fuse specifically designed to meet the Underwriters Laboratories (UL) standard rating. It should be connected to an appropriate circuit breaker or other over-current protection device for additional protection. The installation of a BP/FRN-R-30 fuse is very important for the safety of both the users and the equipment.

The specific data is subject to PDF, and the above content is for reference