BQ014D0104K

Operating Temperature:	-55°C ~ 100°C
Features:	--
Ratings:	--
Applications:	General Purpose
Lead Spacing:	0.200" (5.08mm)
Termination:	PC Pins
Height - Seated (Max):	0.256" (6.50mm)
Size / Dimension:	0.295" L x 0.098" W (7.50mm x 2.50mm)
Package / Case:	Radial
Mounting Type:	Through Hole
Series:	BQ
Dielectric Material:	Polyester, Metallized
Voltage Rating - DC:	63V
Voltage Rating - AC:	40V
Tolerance:	±10%
Capacitance:	0.1µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Film Capacitors Film capacitors are widely used in many applications due to their advantages of small size, low cost, stable performance, and wide application range. Film capacitors have two important application fields: power factor correction and harmonic filter. These application fields have different working principles. Power Factor Correction Power factor correction is a common use of film capacitors. Power factor is the ratio of active power to apparent power, which means how much energy is actually used and how much is wasted. The greater the power factor, the smaller the energy loss. Film capacitors can help improve the power factor of a system. The working principle of film capacitors for power factor correction is based on the characteristics of capacitors as energy storages. A power factor correction capacitor works by storing energy for a short time and then releasing it back into the system. The storage and release of energy helps improve the power factor of the system. The size of the film capacitor used for power factor correction depends on the size of the system and the desired power factor correction. The voltage rating should be higher than the maximum voltage the system will experience. The capacitance of the capacitor is also important, as it determines how much energy can be stored. Harmonic Filter Harmonics are high frequency signals which are caused by non-linear loads and can degrade the power quality of an AC system. Film capacitors can be used as harmonic filters to reduce the effects of harmonic current in a system. The working principle of a harmonic filter is based on the reactive power of the capacitor. The capacitor acts as a load on the system, absorbing energy from the system at certain frequencies while releasing energy at other frequencies. This helps balance the harmonic current in the system and reduce the amount of power lost due to harmonic current. The size of the film capacitor used for harmonic filtering depends on the size of the system and the frequency of the harmonic current. Higher frequency harmonics require higher voltage rated capacitors and higher capacitance values. Conclusion BQ014D0104K is an example of a film capacitor which can be used for both power factor correction and harmonic filter. Film capacitors are suitable for a wide range of applications due to their small size, low cost, and stable performance. The size and parameters of the capacitor should be chosen based on the application and the specific requirements of the system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description