Allicdata Part #: | BS-156.250MCC-T-ND |
Manufacturer Part#: |
BS-156.250MCC-T |
Price: | $ 2.51 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | OSC SO 156.25MHZ LVPECL SMD |
More Detail: | 156.25MHz SO (SAW) LVPECL Oscillator 2.5V Enable/D... |
DataSheet: | BS-156.250MCC-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 2.26233 |
Frequency Stability: | ±100ppm |
Current - Supply (Disable) (Max): | -- |
Height - Seated (Max): | 0.071" (1.80mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 6-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 80mA |
Operating Temperature: | -10°C ~ 70°C |
Series: | BS |
Voltage - Supply: | 2.5V |
Output: | LVPECL |
Function: | Enable/Disable |
Frequency: | 156.25MHz |
Type: | SO (SAW) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators
Oscillators are electronic circuit elements that are used for generating electrical signals of a given frequency and amplitude. They are used in a variety of applications, such as frequency-division multiplexing, radio transmission, audio reproductions, etc. One type of oscillator, called the BS-156.250MCC-T, has a wide range of applications.
BS-156.250MCC-T Application Field
The BS-156.250MCC-T oscillator is a commonly used signal source for frequency-division multiplexing where different signals are transmitted over a single data line. The oscillator can also be used in radio transmission applications, where it provides reliable operation over a wide frequency bandwidth. Additionally, the oscillator can be used in applications such as audio-reproduction, where it is used as a reference for generating audio frequencies.
BS-156.250MCC-T Working Principle
The BS-156.250MCC-T oscillator is a voltage-controlled oscillator, which means that its output frequency is directly dependent on the input voltage. The oscillator consists of two parts: an amplifier and an oscillator. The amplifier is used to amplify the input signal, while the oscillator is used to produce the output signal. The oscillator uses a feedback loop to generate a periodic signal whose frequency is determined by the characteristics of the filter network.
The output frequency can be tuned by adjusting the capacitors and inductors in the filter network. The oscillator also uses an amplifier to boost the signal strength before it is passed through the filter network. Finally, the output signal is filtered to remove any unwanted harmonics or noise.
Conclusion
In conclusion, the BS-156.250MCC-T is a commonly used oscillator for a variety of applications, including frequency-division multiplexing, radio transmission, and audio reproduction. It is a voltage-controlled oscillator that uses a feedback loop to generate a periodic signal whose frequency is determined by the characteristics of the filter network.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...