BT-500.000MBB-T

Series:	BT
Packaging:	Tape & Reel (TR)
Part Status:	Active
Base Resonator:	Crystal
Type:	SO (SAW)
Frequency:	500MHz
Function:	Enable/Disable
Output:	LVDS
Voltage - Supply:	3.3V
Frequency Stability:	±50ppm
Operating Temperature:	-10°C ~ 70°C
Current - Supply (Max):	80mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	6-SMD, No Lead
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max):	0.071" (1.80mm)
Current - Supply (Disable) (Max):	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate periodic signals. Two of the most common methods for generating these signals are harmonic oscillators and BT-500.000MBB-T oscillators.A harmonic oscillator is a linear system that produces a frequency-inharmonic steady-state response. It\'s output is a periodic signal which depends on the frequency of the input signal. The output is also governed by the time-dependent behavior of the system. An BT-500.000MBB-T oscillator is a non-linear system that produces a signal whose frequency is approximately constant. It does this by using negative feedback. The output of the oscillator is dependent on the parameters of the amplifier and the feedback network. The BT-500.000MBB-T oscillator has been used in a variety of applications, including timing devices, radio transmitters and receivers, and digital circuits. It is also used in analog circuits, such as microphone preamps and active filters. The BT-500.000MBB-T oscillator works by using negative feedback. It consists of an amplifier, a feedback resistor, and an alternating current source. The alternating current source is used to inject alternating current into the amplifier. The output of the amplifier is then fed back to the input of the amplifier through the feedback resistor. The output of the amplifier is then modulated by the alternating current source. This creates a negative feedback loop that allows the oscillator to maintain a constant, steady-state frequency.The BT-500.000MBB-T oscillator is relatively simple to design. The oscillator circuit consists of an amplifier, a feedback resistor, and an alternating current source. The design parameters are the gain of the amplifier, the feedback resistor, and the frequency of the alternating current. The design of the BT-500.000MBB-T oscillator can be optimized for various applications.The BT-500.000MBB-T oscillator has been used in many applications for its high performance and versatility. It is used in timing devices, radio transmitters and receivers, and digital circuitry. It is also used in analog circuits, such as microphone preamps and active filters. The BT-500.000MBB-T oscillator allows for precise control of the output frequency, allowing for accurate timing and synchronization of components in analog and digital systems.The BT-500.000MBB-T oscillator has many advantages over other types of oscillators. It is relatively simple to design and construct, and it has a wide range of applications. It is also stable, allowing for reliable timing and synchronization of components.In conclusion, the BT-500.000MBB-T oscillator is a versatile device that has been used in a variety of applications. It is reliable, stable, and relatively simple to construct. It can be used in analog and digital circuits for accurate timing and synchronization of devices.

The specific data is subject to PDF, and the above content is for reference