BTH-030-06-C-D-A

Series:	BTH
Packaging:	Tube
Part Status:	Active
Connector Type:	Header, Outer Shroud Contacts
Number of Positions:	60
Pitch:	0.020" (0.50mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Board Guide
Contact Finish:	Gold
Contact Finish Thickness:	50.0µin (1.27µm)
Mated Stacking Heights:	22mm
Height Above Board:	0.836" (21.23mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board to Board)

A BTH-030-06-C-D-A is a type of rectangular connector, typically used in either a board-to-board configuration or a cable connected array configuration. The majority of this type of connector is constructed from plastic and are soldered to a printed circuit board. Depending on the model, the contact range of the BTH-030-06-C-D-A connector will differ, but the general design and principle of operation remains the same.

Application Field

BTH-030-06-C-D-A connectors are generally used in motor control and instrumentation circuits, as well as heavier industrial controllers. Some particular applications that use the BTH-030-06-C-D-A rectangular connector include:

• Industrial Control and Automation
• High-end Controlled Lighting
• Robotic Motion Controls
• Security Systems
• Medical and Laboratory Equipment

Working Principle

The BTH-030-06-C-D-A rectangular connector works by connecting two or more conductive elements in a predetermined configuration. Generally, the configuration is configured in line with a mating movement of the contact. In most cases, the contact can be either 1.27mm or 2.54mm, depending on the specific design of the connector. The electrical connection is made through a soldering process through the contact’s tail to a printed circuit board. In addition, both the contacts and the connector should be subjected to an electrical test prior to installation to ensure that there are no shorts or other electrical problems.Once the connections are verified, the connector can be installed. The installation of the connector will require the user to line up the contact points with the designated contact area of the printed circuit board. Once the contact area is found, the contact point should be inserted into the contact area and then the screw should be tightened. The installation process can vary depending on the design of the printed circuit board, so it is advised to refer to the Technical Data Sheet of the connector for further information.

Conclusion

The BTH-030-06-C-D-A rectangular connector is a widely used form of connection for many automated systems and devices. The contact range of the BTH-030-06-C-D-A can vary and electrical testing is required prior to installation. The installation of the connector should follow the instructions outlined in the Technical Data Sheet of the connector, and the correct mating movement must be performed. By following these steps, a secure connection can be established between the two boards or devices.

The specific data is subject to PDF, and the above content is for reference