BTS-075-02-F-D-K

Series:	BTS
Packaging:	Tube
Part Status:	Active
Connector Type:	Socket, Outer Shroud Contacts
Number of Positions:	150
Pitch:	0.025" (0.64mm)
Number of Rows:	2
Mounting Type:	Surface Mount
Features:	Pick and Place
Contact Finish:	Gold
Contact Finish Thickness:	Flash
Mated Stacking Heights:	5mm
Height Above Board:	0.160" (4.06mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

()

Rectangular Connectors - Arrays, Edge Type, Mezzanine (Board to Board)

The BTS-075-02-F-D-K is a type of Rectangular Connector, Arrays type, Edge type and Mezzanine type, a kind of Board-to-Board connector (B2B). This type of connector is utilised in a variety of applications, including telecom, datacom, consumer electronics, medical devices, instrumentation, military-aerospace, and industrial products.The BTS-075-02-F-D-K has two sides, one inserted into the PCB and the other part of the connector seated on the PCB. The sides are designed to fit each other by two rows of pins on the top and bottom. The pin pitch (the distance between the two rows of pins) for the BTS-075-02-F-D-K is 0.075 inch. The pins are typically 10 mils square. The connector consists of metal contacts housed in an insulator which gives the sides electrical isolation from each other, and the contacts are configured in a row along each side of the board. The connector is designed to reduce the transmission delay time of signals between the boards. It utilizes copper contacts which transfer signals reliably due to their low resistance and offers superior ergonomic performance to minimize signal path impedance which results in better signal integrity without interference, crosstalk, and EMI. This helps speed up signal transmission and reduces signal loss. The insulation between the two sides of the connector ensures that waves travelling through the connector are prevented from travelling back and interfering with other signals travelling through other parts of the PCBs. This leads to fewer errors and better performance. Additionally, the design of the connector increases the contact area between the pins, allowing for better contact and improved signal quality.The BTS-075-02-F-D-K utilizes an “edge type” configuration that is designed to fit into a groove on the PCB. This helps to reduce the size of the connector and makes it easier to install the connector. In addition, the edge type configuration provides an empty space inside the connector without the need for using an additional housing spacer. This decreases the overall cost of the connector as well as its weight. The BTS-075-02-F-D-K is designed to be used in combination with a pair of PCBs. It helps to provide reliable connection between the two PCBs with minimal crosstalk, EMI, and signal loss due to its improved design and contact area between the pins. Furthermore, the edge type design allows for the connector to be installed in a tight space and also offers a lower cost compared to other types of connector. Overall, the BTS-075-02-F-D-K is an efficient and reliable connector used in a variety of applications. It utilizes an edge type configuration which reduces the size of the connector, increases the contact area between the two pins, and eliminates the need for a housing spacer. Furthermore, this connector helps provide exceptional signal integrity and is designed to ensure there is minimal crosstalk, EMI, and signal loss.

The specific data is subject to PDF, and the above content is for reference