Series:	BWR
Packaging:	Tube
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Type:	Isolated Module
Number of Outputs:	2
Voltage - Input (Min):	9V
Voltage - Input (Max):	18V
Voltage - Output 1:	15V
Voltage - Output 2:	-15V
Voltage - Output 3:	--
Current - Output (Max):	330mA, 330mA
Power (Watts):	10W
Voltage - Isolation:	1kV
Applications:	ITE (Commercial)
Features:	--
Operating Temperature:	-40°C ~ 100°C
Efficiency:	84%
Mounting Type:	Through Hole
Package / Case:	5-DIP Module
Size / Dimension:	2.00" L x 1.00" W x 0.38" H (50.8mm x 25.4mm x 9.7mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<

DC DC Converters

DC-DC converters offer conversion of direct current (DC) from one voltage level to another, maintaining the same frequency of the source signal. BWR-15/330-D12A-C is one of the most popular high-efficiency DC-DC converters. It is mostly used in telecommunication, railway, industrial control, electric power, and other areas.The BWR-15/330-D12A-C, made by the Sola/Hevi-Duty brand, is a high-efficiency, constant-current DC input-to-DC output voltage converter. This device offers input voltages of 12 to 240V DC, and outputs 12 to 330V DC. This device has a continuous current of 12A and is typically used in power supplies and other applications.The BWR-15/330-D12A-C is equipped with a dual-mode design for peak current limiting. It works to reduce spikes in current that could potentially damage the system. The device is protected against short circuit and overcurrent fault conditions and is current-limiting. It also features over voltage protection and a power limiting design for improved system safety.The main purpose of the BWR-15/330-D12A-C is to convert a DC input voltage from 12 to 240V to a DC output voltage of 12 to 330V. The device is highly efficient, achieving up to 99.5% system efficiency when using the device in parallel operation. Its high efficiency provides greater energy savings and higher reliability, as well as reducing the cost of operation.The BWR-15/330-D12A-C also features a built-in temperature sensor which is connected in series with the input and output windings. This feature allows the device to protect itself from overheating due to prolonged use. The device also features an open-loop design for greater performance and stability.The working principle of the BWR-15/330-D12A-C is based on the use of a high-frequency inverter which converts the input DC voltage into an alternating voltage. This alternating voltage is rectified to form a signle-side waveform. The single-side waveform is then fed to a low-power switch that reduces the voltage by a predetermined ratio. This is then fed to a diode bridge rectifier, which produces a steady output voltage.The BWR-15/330-D12A-C DC-DC converter is ideal for a wide range of applications, from telecoms and railways, to industrial control and electric power. Its high efficiency enables greater power savings and improved system reliability, as well as reducing the cost of operation. Its dual-mode design for peak current limiting ensures greater system safety, while its built-in temperature sensor prevents overheating and provides enhanced system performance and stability.

The specific data is subject to PDF, and the above content is for reference