C-2 60.0000K-P

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are regularly used in a variety of applications, due to their unique physical, chemical, and electrical properties. The particular type of crystal used in a particular application depends on the required frequency, temperature range, voltage, and power performance. One such crystal is the C-2 60.0000K-P crystal, which is particularly suitable for use in oscillator and filter applications. This article will discuss the application field and working principle of the C-2 60.0000K-P crystal.

The C-2 60.0000K-P crystal is a piezoelectric crystal that is used in oscillator and filter circuit applications. It is made of a crystalline material that is made up of two alternating layers of aluminum oxide and platinum oxide, which gives it its piezoelectric properties. These piezoelectric properties allow the crystal to act as an oscillator, generating a signal at a specific frequency when a voltage is applied. The frequency is determined by the size of the crystal and its specific crystal structure, and can either be tuned or fixed. The C-2 60.0000K-P crystal is a fixed frequency crystal, operating at a frequency of 600 kHz.

The C-2 60.0000K-P crystal is typically used in oscillator circuits as it is well-suited for generating extremely accurate signals at a known frequency. The frequency of the generated signal is very stable and does not vary significantly even over long periods of time. This makes it ideal for use in applications such as clock and timing systems, where accurate signals are required. The C-2 60.0000K-P crystal can also be used in filter circuits, where it is used to separate signals of certain frequencies from others. This is done by using a resonant circuit which selectively filters out signals of frequencies which are different to the resonant frequency of the crystal.

In order to generate a signal, the C-2 60.0000K-P crystal must be connected to a powered oscillator circuit. This circuit typically consists of an amplifier and output stage, together with a frequency selection component that determines the frequency of the generated signal. In order to drive the crystal, a voltage must be applied by an external source, such as the output of a voltage controlled oscillator (VCO). The frequency of the output signal will depend on the frequency of the VCO, as well as the load applied to the crystal. At 600 kHz, the C-2 60.0000K-P crystal can generate signals of up to 60 MHz if a suitable load is applied.

The C-2 60.0000K-P crystal can also be used in filter circuits. In a filter circuit, the crystal is connected to an amplifier, which is then connected to a tuned circuit that is used to filter out signals of a certain frequency. The tuned circuit resonates at a specific frequency determined by the crystal, and any signals of frequencies that are not equal to the resonant frequency will be filtered out. This is useful for separating different types of signals, or for removing noise from an incoming signal.

The C-2 60.0000K-P crystal is a versatile and reliable crystal that provides accurate and stable oscillations at a fixed frequency of 600 kHz. It is well-suited for use in oscillator and filter circuits, and its piezoelectric properties allow it to generate signals at frequencies up to 60 MHz. Its durability and reliability make it a popular choice for applications that require precise and dependable signals.

The specific data is subject to PDF, and the above content is for reference