C-2 71.0000KC-P

Crystals are widely used in a variety of applications. C-2 71.0000KC-P is a type of crystal resonator, which consists of two metal plates attached to a quartz crystal sandwiched between them. It is mainly used for timing, frequency control, and synchronization.

The C-2 71.0000KC-P crystal resonator can operate at frequencies between 4MHz and 4.6MHz. It has a frequency tolerance of ±20ppm with a drive level between 4µW and 30µW.

In operation, the crystal resonator creates a periodic mechanical vibration at its resonance frequency. This vibration creates an alternating current at the same frequency in the metal plates. This alternating current can be amplified to produce a signal of higher power.

The C-2 71.0000KC-P crystal resonator is mainly used in oscillator circuits such as phase-locked loops, frequency synthesizers and quartz clock circuits. It is used to generate timing signals for digital systems, including computers and modems.

In a phase-locked loop circuit, the C-2 71.0000KC-P crystal resonator generates a sinusoidal feedback signal at a fixed frequency. This signal is used by the circuit to generate an output clock signal with the same frequency as the input.

In a frequency synthesizer circuit, the C-2 71.0000KC-P crystal resonator is used to generate a reference signal which is used to control the frequency of the output signal. In a quartz clock circuit, the crystal resonator is used to provide a very accurate timing signal.

The C-2 71.0000KC-P crystal resonator is a reliable and cost-effective solution for a variety of timing and frequency control applications. Its combination of small size and high frequency tolerance makes it ideal for use in many applications, including computers and other digital systems.