C-56U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The C-56U type fixed inductor is a small inductor that is typically used in certain applications, such as power supplies, audio amplifiers, or electronic ballasts. The C-56U is a fixed inductor with high saturation current and low power dissipation, enabling it to handle high-power applications. The C-56U inductor has a wide variety of applications due to its small size, high current capacity, low power dissipation, and low cost.

The C-56U inductor is a wound type inductor, which consists of an inductor core or ‘spool’ and a coil wound around it. The coils, along with the inductor core, are wound with insulated wire of a certain diameter. The core is designed to reduce the number of turns required to achieve a certain inductance value, and the number of turns is also dependent on the core material. The material, such as ferrite or iron, is usually chosen based on the operating frequency, core size, and inductance value.

The working principle of the C-56U type inductor is based on Faraday’s law of induction. When an alternating current flows through the inductor, an EMI field is generated, causing the inductor’s core to become temporarily magnetized. As the current alternates, the EMI field expands and contracts, creating a varying magnetic flux around the inductor, which then induces an electric current in the windings.

C-56U type inductors are commonly used in a wide variety of applications, including power supplies, audio amplifiers, motor controls, power transformers, and other circuits requiring high current capacity and low power dissipation. They are also used as decoupling capacitors for RF, high-voltage, or switching power supplies, and can be used in antenna coils, filter networks, and resonators.

In audio amplifiers, C-56U type inductors can be used to improve the overall performance of the system. They are also used to eliminate electromagnetic interference (EMI) noise from the circuit, by absorbing and blocking the EMI field generated by the circuit. Moreover, the inductors can be used to lower the DC offset in the circuit, and to reduce the output impedance, which in turn lowers the output power dissipation.

In a power supply or a motor control circuit, C-56U type inductors can be used to reduce current saturation and to improve efficiency. Additionally, the inductors can be used to store and release energy, which can help to prevent power surges or spikes. In filter networks, C-56U inductors can be used to separate or eliminate certain frequencies, such as high frequency radio waves.

In summary, the C-56U type inductor is a fixed inductor that is small in size, highly reliable, and cost-effective. It has a wide range of applications in various circuits, including power supplies, audio amplifiers, motor controls, antenna coils, filter networks, and resonators. The C-56U inductor works on Faraday’s law of induction, creating an EMI field that induces an electric current in the windings. This, along with its high current capacity and low power dissipation, makes it an ideal component for many applications.

The specific data is subject to PDF, and the above content is for reference