C0603C-27N0G1T1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are a form of inductive component, typically comprising of a coil of insulated wire wound around a core. The most common type of core is iron or ferrite, but other materials such as air, ceramic, and plastic can also be used. The C0603C-27N0G1T1 Fixed Inductor is a surface-mount component that is ideal for use in high frequency applications such as radio frequency ID (RFID) tags and cellular, Wi-Fi, Bluetooth, and similar technologies.

The C0603C-27N0G1T1 comprises of a non-ferrous metal core with a flush outer diameter of 0.6mm and height of 0.7 mm. The core is wrapped with 0.75mm of polyester tape, before being wound 120 times with a wire external diameter of 0.06 mm. As the core is non-ferrous, the C0603C-27N0G1T1 has a surprisingly high inductance value for its size, with a typical inductance of 27nH. The lead wires of the component are tinned copper, allowing for easy soldering and good electrical connectivity to the printed circuit board.

The C0603C-27N0G1T1 Fixed Inductor is typically used in circuits that need to support high frequencies, where it functions by restraining changes in current. Its small size allow for tight coupling, meaning that most of the magnetic flux from the core is trapped inside the coil, resulting in minimal energy losses. This makes the component suitable for filter circuits that need to restrain unwanted frequencies.

The C0603C-27N0G1T1 can also be used as an antenna. Because of its small size, it can be installed very close to the PCB, thus allowing for flat antenna designs. This is an advantage for applications where space is limited. This type of antenna is not suitable for transmitting power, but rather for receiving incoming communications. It works in conjunction with other components in the circuit such as amplifiers and filters, helping to maximize the reception of desired signals.

Due to their small size, high frequency, high inductance, and excellent coupling, the C0603C-27N0G1T1Fixed Inductor is an ideal component for usage in low-power wireless communication and electronic devices such as RFID tags, wireless sensors, and wearable electronics. It also has the ability to be used in high-end, high-frequency applications such as telecom applications and Wi-Fi systems. In addition, due to its low profile design, it is also suitable for use in space-limited or multi-layer board applications.

The specific data is subject to PDF, and the above content is for reference