C1202-100

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Multiple Conductor Cables

Cable type C1202-100 is a multiple conductor cable typically used for distributing power, control and signal in industrial and commercial applications. Its design makes it suitable for installations exposed to high mechanical stresses, volatile and aggressive environments, or highly combustible areas. The cable is constructed from twisted closely-spaced insulated conductors, aligned and held together as a single unit with a common sheath, allowing the conductors to be installed in conduit, inner ducts and raceways.

Applications

Cable type C1202-100 is primarily used in industrial or commercial applications requiring the distribution of high power, control and signal between aggregates and control racks. Common applications include motorized equipment applications, building automation, computer installations, telephone systems, lighting controls, process controls, and audio visual systems. The insulated conductors can be used in wet, damp, or dry conditions, and can be installed in conduit, inner duct or raceways.

Installation

Cable type C1202-100 must be installed according to its design specifications. These specifications are typically provided by the manufacturer. The cable should be installed using suitable supports to minimize mechanical stresses and low temperature conditions. It is critical that the cable is not over–bent, pulled, twisted, or subjected to any other mechanical stress. Connections should be made using suitable connectors that are suitable for the application.

Working Principle

The cable type C1202-100 is the type of cable for multiple conductors. It is typically made by twisting tightly-spaced insulated conductors, aligning them and binding them as one unit with a common sheath. This allows the conductors to be installed in conduit, inner ducts or raceways. The cable is usually applied in conditions exposed to high mechanical stresses, volatile and aggressive environments or highly combustible areas. Therefore, it requires special installation methods to minimize these conditions.

Construction Features

The cable is typically constructed with a bare or insulated tinned copper conductor and a flexible PVC insulation. The number of conductors varies, but usually it has two to four or more insulated conductors that are twisted and bound together by a common PVC sheath. The core of the cable is usually filled with insulation or a suitable electrostatic shield. It is also provided with a drain wire, and an insulation resistance wire and its resistance is measured and controlled. The maximum conductor operating temperature is usually set between 60°C to 120°C.

Specifications and Performance

The cable type C1202-100 complies with current international standards for power, control and signal cables. These are generally UL, CSA, NEMA, and UL and VDE. It has a working voltage of 600V. It has a minimum bending radius of eight times the outer diameter of the cable and it has a minimum tensile strength of 25 lbs. Its temperature ratings can range between -20°C to 120°C.

Conclusion

Cable type C1202-100 is a multiple conductor cable typically used for distributing power, control and signal in industrial and commercial applications. It is constructed from twisted closely-spaced insulated conductors, aligned and held together as a single unit with a common sheath. This cable has a wide range of applications in industrial and commercial applications, and is typically applied in conditions exposed to high mechanical stresses, volatile and aggressive environments or highly combustible areas. It complies with international standards for power, control and signal cables, such as UL, CSA, NEMA, and UL and VDE.

The specific data is subject to PDF, and the above content is for reference