C30S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF antennas can be divided into two major categories, the C30S type and the horn type. The C30S type is often used for high-power applications due to its robust construction and good electrical performance. The C30S type antenna is also ideal for short-distance communications because of its beamwidth and gain.

The C30S antenna has a 30cm diameter parabolic reflector made of corrugated aluminum sheet. The antenna has a feed interface for attaching a variety of radio frequency (RF) feed systems. The C30S antenna also has an electrically-stabilized cylindrical aluminum ground plane and support structure. Typically the antenna is mounted on a pylon or a tower and can be adjusted in three axes – azimuth, tilt and elevation.

The main advantage of C30S antennas is that they can provide high gain with moderate directivity. This is due to the curved reflector surface and the ground plane, which both act as lenses, reflecting the incoming RF waves back toward the direction of the source. The directivity of the antenna can be further improved by adding additional reflector elements or changing the curvature of the reflector.

The C30S antenna is generally used for communications over relatively short distances. This is due to the narrow beamwidth, which is approximately 3 to 6 degrees off-axis. However, the antenna can be used for longer distances by increasing the gain. This is typically achieved by adding additional gain elements to the antenna or by increasing the size of the reflector.

The C30S antenna also has a relatively low noise figure. This means that the antenna is able to receive low-level signals without any significant levels of interference. This is especially beneficial in applications where a high signal-to-noise ratio is needed.

The C30S antenna is primarily used in high-power applications, such as TV broadcast, radio broadcast, satellite communications, wireless internet connections, mobile telephone networks, and long-distance communications. The antenna is also used for military applications, such as secure communications, weather monitoring, and surveillance.

The working principle of the C30S antenna is based on the concept of radiation. Waves of electromagnetic energy propagate away from the antenna in all directions. The curved reflector surface directs the waves back towards the source, increasing the antenna\'s gain. The ground plane acts as a lens, focusing the waves in a specific direction.

In addition to its use in high-power applications, the C30S antenna is also used in low-power applications. It is often used for short- or medium-distance communications, such as two-way radio, amateur radio, and remote-control systems. The relatively narrow beamwidth allows for better directionality, which can be critical for these types of applications.

Overall, the C30S antenna is an excellent choice for high-power and long-distance applications, due to its high gain and low noise figure. It is also a popular choice for low-power applications due to its relatively narrow beamwidth and good directionality. The C30S antenna is typically mounted on a tower or pylon and can be adjusted in three axes for optimal performance.

The specific data is subject to PDF, and the above content is for reference