C3292-60.000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have been used to generate linear or non-linear signals over a wide range of frequencies since their development. As such, they have been used in numerous applications in electronics, telecommunications, and computers. The C3292-60.000 oscillator is an example of an oscillator that is designed for applications such as switch-mode power supplies, pulse-code-modulated (PCM) communication systems, and clock-driven logic circuits.

The C3292-60.000 oscillator is a widely used surface-mount oscillator that utilizes a transistor-based design with its own internal feedback circuitry. This design allows the oscillator to operate at very low frequencies up to 60 MHz without traditional crystal resonators. The oscillator also has a wide operating temperature range of -55°C to 95°C and wide frequency tuning sensitivity of ±150 ppm over a -40°C to 85°C temperature range.

The working principle of the C3292-60.000 oscillator is based on an astable multivibrator circuit. An astable multivibrator is a circuit design that can be used to generate a periodic square wave, with the desired characteristics of the pulse width and frequency. In the C3292-60.000 oscillator, the astable multivibrator circuit consists of two transistors connected in a circuit such that when one transistor is turned on, the other is turned off, and vice versa. The circuit also contains a capacitor and resistor that determines the period of the oscillation.

When the C3292-60.000 oscillator is turned on, current flows through the resistor, charging the capacitor. Once the capacitor has charged to a certain threshold, the transistor will turn off, allowing the capacitor to discharge. This then causes the transistor to turn back on, restarting the cycle and generating a periodic signal. The frequency of this signal is determined by the values of the capacitor and resistor, and can be easily adjusted by changing these values.

This oscillator is useful in many applications, such as PCM communication systems where it is used to supply a timing signal that is used to sample and encode audio signals. It is also used in switch mode power supply units, as the oscillator can provide a highly regulated clock signal for controlling the on/off timing of the switch mode devices. In logic circuits, the oscillator is used to provide a clocking signal to synchronize the logic components.

When manufacturing oscillators, careful attention to heat dissipation is necessary to ensure that the oscillator does not overheat and cause damage. In the case of the C3292-60.000 oscillator, the design utilizes an efficient heat dissipation mechanism, allowing it to be used in a variety of environments with minimal thermal stress.

The C3292-60.000 oscillator is a reliable and cost-effective option for applications requiring low-frequency oscillators. Its wide temperature range and frequency tuning capability make it ideal for use in numerous applications, including switch-mode power supplies, PCM communication systems, and logic circuits.

The specific data is subject to PDF, and the above content is for reference