C44-NKO12H-CWO

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Panel indicators, pilot lights and C44-NKO12H-CWO are all common terms used in electrical engineering and industrial production. A panel indicator, sometimes referred to as an alarm light, is a device mounted to the front panel of electrical equipment to provide the operator with visual information regarding the status or operation of the equipment. This equipment may be safety-sensitive and the indicator may be designed as a way to alert the operator to an unsafe condition. Pilot lights are small indicator lights which are usually LEDs which can be used to display the status of an external device. A pilot light is generally used to indicate whether power is being applied to that device. A C44-NKO12H-CWO is an Adaptive Low Voltage Disconnect Module (ALVDM) which has a single adjustment that allows for the disconnection of the circuit when the voltage drops to a certain level.

C44-NKO12H-CWO modules are used in industrial applications with a big control panel. It is designed to disconnect and connect up to 10A loads in case of a low voltage event. It is commonly used in motor start/stop applications to prevent overloading and damaging of the system. It works on an adjustable voltage from 12V to 24V DC and can be activated or deactivated by simply turning a knob or switch.

The C44-NKO12H-CWO is an adaptive controller and when the applied voltage falls below it’s set threshold an internal relay will open and disconnect the load from the circuit. It contains two thresholds of operation: a high and low. The upper threshold is adjustable and determines when the load is connected to the circuit. The lower threshold is the built-in 12V which is fixed. If the voltage falls between these two levels the auto-reset feature will activate and the load will be re-connected to the circuit when the voltage rises above the low level.

The C44-NKO12H-CWO module has a variety of applications in industry and in electrical engineering. It is commonly used in motor control systems to prevent overloading of the system, which could cause damage and system shutdowns. It can also be used in automotive electrical systems to prevent damage to sensitive components which could be caused by low voltage. Additionally, it can be used to disconnect or connect any type of load such as a lamp or fan in case of a low voltage or overload occurrence.

The working principle of C44-NKO12H-CWO module is quite simple and relies on the use of two threshold voltage levels. As mentioned above, these are the upper and lower threshold levels. The upper threshold voltage is adjustable and is used to determine when to connect the load to the circuit. When this fixed-level is reached the relay inside the module will open and disconnect the load from the circuit. When the voltage drops below the low level the auto-reset feature will be activated and the load will be re-connected to the circuit when the voltage rises above this level.

The C44-NKO12H-CWO module is a very effective way to ensure the safety of sensitive components in an electrical circuit. This module works to prevent overloads and other problems which could occur due to a low voltage situation. The adjustable upper threshold voltage allows for the user to set it to a safe level and the built-in auto-reset feature allows for the load to be re-connected quickly in the event of a low voltage. With its wide range of applications in industry and electrical engineering, the C44-NKO12H-CWO is a great asset to any system.

The specific data is subject to PDF, and the above content is for reference