CA-301 50.0333M-C: PB FREE

Series:	CA-301
Part Status:	Active
Type:	MHz Crystal
Frequency:	50.0333MHz
Frequency Stability:	±30ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	80 Ohms
Operating Mode:	3rd Overtone
Operating Temperature:	-20°C ~ 70°C
Ratings:	--
Mounting Type:	Through Hole
Package / Case:	Cylindrical Can, Radial
Size / Dimension:	0.122" Dia x 0.350" L (3.10mm x 8.90mm)
Height - Seated (Max):	0.350" (8.90mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are essential components in modern communication systems. The CA-301 50.0333M-C is an example of a type of crystal called a "PB-FREE Crystal". This crystal can be used for various applications, including as a Local Oscillator (LO) for Portable RF Equipment, cellular base stations, digital satellite receivers, hand-held radio modems, wireless LANs and wireless modems. In addition, it is able to function as a reference clock for integrated circuits and peripherals such as microprocessors, DACs (Digital-to-Analog Converters) and ADC’s (Analog-to-Digital Converters). A PB-FREE Crystal is an ultra-miniature crystal that is optimized for its size and reliability, while still able to provide highly accurate performance. It is able to provide a low frequency oscillatory waveform with low phase noise, low jitter and very low power consumption. It operates at frequencies ranging from 40KHz to 500 MHz, with a typical output frequency of 50Mhz. A PB-FREE Crystal has two main components: an oscillator and an amplifier. The oscillator is the primary component and is constructed from a quartz crystal, which works by vibrating an electrical field through its surface. The quartz crystal is then placed within a resonant circuit and a voltage-controlled oscillator (VCO). The VCO is what creates the frequency of the oscillation and is the component responsible for actual tuning the frequency. The oscillator then passes through an amplifier to amplify the signal before it is output to the external circuit. The oscillator’s frequency is determined by how the crystal is cut. The surface of the crystal is specially chosen to select a particular frequency. This surface can be cut with a number of different methods, including lapping, grinding and cutting with a diamond saw. The oscillator also includes tuning circuits which allow the frequency to be changed by altering the voltage applied to the crystal. The performance of the CA-301 50.0333M-C can be improved by the addition of a temperature-compensated quartz oscillator (TCXO). This is an essential component for increased accuracy in systems sensitive to temperature changes, such as GPS and telecommunication systems. The TCXO uses temperature sensors to feed in temperature-dependent variable capacitors in order to adjust the frequency over a large temperature range. The performance of the CA-301 50.0333M-C is benefited from the use of an impedance-matched (EMC) package, which helps to keep the frequencies low and the signal-to-noise ratio low. This is a special type of packaging designed to reduce electromagnetic interference in order to make the product more resistant to interference. The package also helps to ensure that the crystal is placed in the best position to avoid signal interference from other components. In conclusion, the CA-301 50.0333M-C is a PB-FREE Crystal and is capable of a wide range of applications thanks to its accurate frequency, low power consumption and heat resistance. Its small size and low cost make it an attractive choice for many applications requiring a stable and reliable operation.

The specific data is subject to PDF, and the above content is for reference