CA-301 6.000M-C Allicdata Electronics
Allicdata Part #:

SE3409-ND

Manufacturer Part#:

CA-301 6.000M-C

Price: $ 0.00
Product Category:

Crystals, Oscillators, Resonators

Manufacturer: Epson
Short Description: CRYSTAL 6.0000MHZ 18PF T/H
More Detail: 6MHz ±30ppm Crystal 18pF 80 Ohms Cylindrical Can, ...
DataSheet: CA-301 6.000M-C datasheetCA-301 6.000M-C Datasheet/PDF
Quantity: 1000
1 +: 0.00000
Stock 1000Can Ship Immediately
$ 0
Specifications
Series: CA-301
Packaging: Bulk 
Part Status: Obsolete
Type: MHz Crystal
Frequency: 6MHz
Frequency Stability: ±30ppm
Frequency Tolerance: ±30ppm
Load Capacitance: 18pF
ESR (Equivalent Series Resistance): 80 Ohms
Operating Mode: Fundamental
Operating Temperature: -20°C ~ 70°C
Ratings: --
Mounting Type: Through Hole
Package / Case: Cylindrical Can, Radial
Size / Dimension: 0.122" Dia x 0.350" L (3.10mm x 8.90mm)
Height - Seated (Max): 0.350" (8.90mm)
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

CA-301 6.000M-C is a type of crystal oscillator, which is widely used in the fields of telecommunication, military, aerospace and industrial control. It is composed of five major parts: quartz crystal, oscillator circuit, dampers, cover and regulator.

Quartz is the main component of a crystal oscillator. It is a form of crystalline silica and has many interesting properties, such as piezoelectricity, which occurs when quartz is exposed to an electrical field. This property can be used to control the frequency of the oscillator\'s output.

The oscillator circuit is the second major part. It is used to convert the electrical energy supplied by the quartz crystal into an oscillating signal of a specific frequency. Generally, a transistor amplifier is used to drive the quartz crystal, while the capacitor and resistor are used to tune the frequency and damp any vibrations caused by the crystal.

The dampers are the third major component, which are used to reduce the noise generated by the oscillator circuit. These devices act as filters, absorbing unwanted frequencies and dampening oscillations. This ensures that the signal generated by the oscillator is as clean as possible.

The cover is the fourth component, which is also known as the crystal can. It is used to protect the quartz crystal and other parts from any external mechanical shocks. It also helps in controlling the temperature of the oscillator.

Finally, the regulator is the fifth component, which is used to maintain the operating frequency of the oscillator within the specified range. The regulator is connected to the output of the oscillator and its frequency is adjusted to match the desired frequency.

The CA-301 6.000M-C is a very reliable and accurate oscillator, which has been successfully used in many applications. It is suitable for use in telecommunication, military, aerospace and industrial control applications.

In conclusion, the CA-301 6.000M-C is a type of crystal oscillator, which consists of five major components. It is composed of quartz, an oscillator circuit, dampers, a cover, and a regulator. It is very reliable and accurate, which makes it suitable for various applications, such as telecommunication, military, aerospace and industrial control.

The specific data is subject to PDF, and the above content is for reference

Latest Products
CSTCE8M59G55A-R0

Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...

CSTCE8M59G55A-R0 Allicdata Electronics
416F520X3CLT

CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...

416F520X3CLT Allicdata Electronics
416F500X3AKT

CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...

416F500X3AKT Allicdata Electronics
416F48022CKT

CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...

416F48022CKT Allicdata Electronics
416F44023ITT

CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...

416F44023ITT Allicdata Electronics
416F406X2AST

CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...

416F406X2AST Allicdata Electronics