CA000120R00JS70

Series:	CA
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	20 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-65°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.170" Dia x 0.460" L (4.32mm x 11.68mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a type of electrical component used to control current flow in an electronic circuit. These components are commonplace in a variety of electrical circuits such as radios, amplifiers, televisions and computers. The CA000120R00JS70 through hole resistor is a common device and one of the most popular models.

Description

The CA000120R00JS70 through hole resistor is a compact device measuring approximately 0.62 x 0.45 inches. It is composed of an encased metal film resistor and typically features a power rating of 0.1 watts. The device has a maximum voltage rating of 150 volts, a tolerance of five percent and a current rating of 15 milliamps. It can be soldered directly onto a printed circuit board or breadboard.

Application Field and Working Principle

The CA000120R00JS70 through hole resistor is designed to control the current flow in an electrical circuit. The device works by creating an obstruction to the current flow. This obstruction is customized to the desired level and is known as the resistor\'s resistance level. The value of the resistor is determined by the ratio of current to voltage across the device. The value of the resistance is typically indicated on the device with stripes.The CA000120R00JS70 through hole resistor is widely used in a variety of electronic systems. It can be used to limit the current flow in an amplifier, create an offset voltage in a radio antenna, or decrease noise levels in an oscillator circuit. The device is also useful for buffering signals in computer networks. It is also used to protect components in a circuit from power spikes or static electricity.

Installation

The CA000120R00JS70 through hole resistor should be installed with proper care and consideration. Be sure to check the values of the device prior to installation as the tolerance could vary from design specifications. Proper cooling should be applied to the device at all times to ensure that the temperature does not exceed specified values.To install the CA000120R00JS70 through hole resistor, first ensure that the leads are slightly pre-tinned with a soldering iron. Secure the device on the printed circuit board or breadboard using 20-gauge nylon standoffs. Heat the soldering iron tip to 650-degrees Fahrenheit and place a small amount of flux on the device\'s pins. Place the soldering Iron tip on the resistor\'s pins and apply a small amount of solder sufficient to tin the leads.

Conclusion

The CA000120R00JS70 through hole resistor is a compact device designed to control the current in an electronic circuit. The device is suitable for use in a variety of applications and is simple to install. If properly installed and managed, these devices can provide reliable and efficient performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description