CA00022R700KS70

Series:	CA
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	2.7 Ohms
Tolerance:	±10%
Power (Watts):	2W
Composition:	Wirewound
Features:	--
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-65°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.170" Dia x 0.630" L (4.32mm x 16.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor, such as the CA00022R700KS70, is a type of resistor used in electrical circuits. It is often used in conjunction with other types of resistors, such as surface mount devices (SMD), to control circuit behavior and provide electronic feedback.Through hole resistors are built differently to SMDs in that they have two leads or wires that are inserted into holes that are drilled into a circuit board and aligned in the correct positions. The electronic components are then soldered into place. The wires connected to the resistor must be bent to the required angle before the correct electrical connection is established.The through hole resistor is typically a cylindrical piece of material, usually ceramic, with metal wires extending out from opposite ends. The factor of the resistor being cylindrical is important because it allows for the resistor to be drilled and inserted into a board at a particular angle. This offers improved stability and a greater heat dissipation potential than a flat object would have.Functionally, through hole resistors limit the current flow in a circuit in order to protect and maintain the functionality of the circuit. The use of through hole resistors allows for precise optimization of the current based on the power level desired. They are the most common type of resistor found in systems, hobby and industrial electronics, as well as in analog and digital circuits.More specifically, a resistor is an electronic component that limits current and voltage by adding resistance to a circuit. Resistor can be used to control the current flow, dampen signal noise, improve and distribute current, and reduce voltage. The physical value of resistance in a resistor is determined by the material from which it is made and the length and thickness of the material.When it comes to the CA00022R700KS70, it is a four-terminal through-hole resistor; the first and fourth terminals are the two end terminals, and the second and third terminals are the two middle terminals. It is constructed by sandwiching two resistive metallic layers which are separated by a ceramic substrate, and then encapsulated in a robust epoxy body. Its encapsulation is hermetically sealed for better durability, and it is designed for surface mount soldering applications.The CA00022R700KS70 is heat resistant up to 150 ˚C. Its operating temperature range is from -55 ˚C to +150 ˚C, and it has been developed for use in a wide variety of applications, including telecommunications, computer and digital equipment, automotive applications, power supplies, amplifier circuits and more.The CA00022R700KS70 works by providing resistance to a circuit, so the length of wire and the diameter of the object that make up the resistor ultimately determine the amount of resistance. This is known as the "resistance" value, and it is measured in Ohms. Depending on the situation, different types of resistors may be employed in order to obtain the desired results.The CA00022R700KS70 has a low thermal noise, and its superior center-tapping capabilities help prevent parasitic inductances that can cause a negative impact on performance. Its robust construction also helps increase its reliability and life expectancy.The main advantages of through hole resistors are that they are simple to install, they provide accurate values of resistance with minimal impact to installation size, and they have good mechanical integrity for electrical connection. They also have superior long-term reliability due to their robust design.To summarize, the CA00022R700KS70 is a through hole resistor that is designed for use in a wide variety of applications. It\'s made up of two resistive metallic layers, and its encapsulation helps increase its durability and reliability. It has a low thermal noise and good center-tapping capabilities, and its mechanical integrity helps provide accurate values with minimal impact to installation size. Through hole resistors are simple to install and are a popular choice for many electronic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description