Allicdata Part #: | 1295-1140-ND |
Manufacturer Part#: |
CAF-0.5-27 |
Price: | $ 1.34 |
Product Category: | Filters |
Manufacturer: | Talema Group LLC |
Short Description: | CMC 27MH 500MA 2LN TH |
More Detail: | 27mH @ 10kHz 2 Line Common Mode Choke Through Hole... |
DataSheet: | CAF-0.5-27 Datasheet/PDF |
Quantity: | 1000 |
1500 +: | $ 1.21338 |
Voltage Rating - AC: | 250V |
Package / Case: | Horizontal, 4 PC Pin |
Height (Max): | 0.492" (12.50mm) |
Size / Dimension: | 0.689" L x 0.669" W (17.50mm x 17.00mm) |
Mounting Type: | Through Hole |
Features: | -- |
Approvals: | -- |
Ratings: | -- |
Operating Temperature: | -40°C ~ 125°C |
Series: | CA |
Voltage Rating - DC: | -- |
DC Resistance (DCR) (Max): | 1.179 Ohm |
Current Rating (Max): | 500mA |
Inductance @ Frequency: | 27mH @ 10kHz |
Number of Lines: | 2 |
Filter Type: | Signal Line |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes are applied in a variety of industries to reduce electrical interference. The CAF-0.5-27 is one such choke, typically used in low power applications.
The CAF-0.5-27 is a type of electrical filter placed between two parts of a circuit in order to reduce the passage of unwanted noise. The assembly is made up of two distinct components – an inductor and a capacitor. The inductor is a coil of wire with several turns about its axis, while the capacitor is two parallel metal plates separated by an insulating medium. These two components are connected together by conducting wires that allow current to move between them.
The CAF-0.5-27 works by producing an opposing electromagnetic field that cancels out external interference along the lines of communication. As the hostile current or signal passes from one component of the filter to the other, it encounters the opposing fields generated by the inductor and the capacitor. This causes the unwanted signal to be bounced back to its source, while allowing the intended signal to pass through.
In the case of the CAF-0.5-27, the inductor is composed of a bobbin, wrapped with 27 turns of 0.5mm diameter wire. This provides sufficient inductance for low voltage applications, while still allowing efficient high frequency filtering.
Common mode chokes are found in a range of applications. One such application is the automobile industry, where the filters are used to prevent signals from the car\'s internal electronics affecting the electrical system. They are also used in computer systems for shielding the power supply from harmful surges and arcs, or in audio systems to reduce interference from Radio Frequency (RF) signals.
The CAF-0.5-27 is a reliable and cost-effective filter, suitable for applications requiring low-power interference suppression. Although the number of turns and the wire diameter may vary depending on the application, its basic design principles remain the same, and its effectiveness against external noise remains unrivaled.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...