CAT5111VI10

Series:	*
Part Status:	Obsolete

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital Potentiometers

The CAT5111VI10 is a digital potentiometer designed for precision data acquisition applications. This integrated circuit (IC) is designed to measure a range of resistances from 0 to 2.5Ω, and is suitable for high-precision data acquisition applications where a precise measurement of resistance values is required. It can also be used for monitoring load and stability conditions.This IC consists of three channels, each with a 10-bit resolution and an operating temperature range of -40°C to +85°C. The CAT5111VI10 has an integrated voltage regulator that enables it to supply up to ±1.5V of DC voltage to the potentiometer channels. The CAT5111VI10 is powered by +5V supply voltage, and is constructed using CMOS technology, making it suitable for low-power applications.The working principle of the CAT5111VI10 involves measuring changes in the output voltage of each of the three channels of its potentiometer. The measured voltage is then compared to a reference to create a resistance. This resistance is then used to adjust the amplitude and phase of a signal in the data acquisition application.The CAT5111VI10 has a wide range of applications in data acquisition including controlling the amplitude and phase of signals, measuring the resistance of a load, controlling the power transfer efficiency between different electrical circuits, measuring the current and voltage of a load, measuring parameters of a voltage or current supply, and creating an output signal corresponding to a resistance measurement.In addition, the CAT5111VI10 can also be used in industrial applications such as controlling the speed and position of a drive motor, controlling the pressure level of a regulator valve, and controlling the output of a compressor. This IC can also be used in industrial applications such as controlling the power, temperature, and voltage of a machine.The CAT5111VI10 is composed of two parts: the potentiometer and the circuit. The potentiometer is composed of a resistor that is connected to two terminals. The two terminals are connected to the operational amplifier (OP-amp) circuit. The OP-amp is used to measure the voltage difference between the two terminals and to regulate the output. The CAT5111VI10 circuit is a CMOS design and consists of the OP-amp, three resistors, and the digital potentiometer. The three resistors create a voltage divider circuit between the two terminal connections, thus creating three different voltages that change depending on the position of the digital potentiometer. By adjusting the output of the digital potentiometer, the voltage is measured, and the corresponding resistance is presented.The CAT5111VI10 is designed to measure a range of resistances from 0 to 2.5Ω. It has a 10-bit resolution and can be operated in the temperature range of -40°C to +85°C. The CAT5111VI10 is particularly suitable for data acquisition applications, such as monitoring load and stability conditions, and controlling the amplitude and phase of a signal. It is also suitable for industrial applications, such as controlling the speed and position of a drive motor, controlling the power transfer efficiency between different circuits, and controlling the pressure level of a regulator valve.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description