CB3-2C-16M0000

Frequency Stability:	±100ppm
Current - Supply (Disable) (Max):	10µA
Height - Seated (Max):	0.071" (1.80mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	25mA
Operating Temperature:	-20°C ~ 70°C
Series:	CB3
Voltage - Supply:	5V
Output:	HCMOS, TTL
Function:	Enable/Disable
Frequency:	16MHz
Type:	XO (Standard)
Base Resonator:	Crystal
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

1. Introduction

CB3-2C-16M0000 is an oscillator which can convert an alternating electric current into a continuous one. It is a type of electrical circuit which contains a resistor, a capacitor, and an inductor, connected in series or parallel. Oscillators are widely used in applications where a constant frequency is needed. An example of this is in radio broadcast systems where a certain radio frequency is required for transmission. It can also be used for signal generation in electrical systems, such as in servo motors.

1. Application Field

One of the most common uses of CB3-2C-16M0000 is in radio broadcast systems. It is used to generate a radio frequency signal at a precise frequency. This signal is then used to transmit audio signals to a listener. Additionally, it is used to synchronize the frequency of the receiver with that of the transmitter.Another application is in servo motors. This type of motor needs a constant frequency signal in order to control its motion. The CB3-2C-16M0000 can produce a signal at rates of up to 16 megahertz, making it suitable for controlling servo motors.The CB3-2C-16M0000 can also be used in oscilloscope and other testing and monitoring systems. It is used to measure, record, and analyze electrical signals.Finally, it can also be utilized in noise reduction systems. It is often used to reduce the amount of noise generated by electrical systems.

1. Working Principle

The CB3-2C-16M0000 is based on the principle of oscillation. It converts an alternating electric current into a continuous one. The circuit works by charging and discharging a capacitor in a set pattern, producing an oscillating current. This current is then used to create a sound signal, which is used for audio broadcasting or other applications.When a capacitor is charged, it stores energy and when it is discharged, it releases energy. The frequency of this process is determined by the value of the resistor, capacitor, and inductor. The resistor and inductor control the rate at which the capacitor charges and discharges, while the capacitor determines the total amount of energy stored.The CB3-2C-16M0000 can be adjusted to produce different frequencies. By adjusting the values of the components, a range of frequencies from 1 nanosecond to 16 megahertz can be produced.

1. Conclusion

CB3-2C-16M0000 is an oscillator which converts an alternating electric current into a continuous one. It is a type of electrical circuit which contains a resistor, a capacitor, and an inductor, connected in series or parallel. This circuit works by charging and discharging a capacitor in a set pattern, producing an oscillating current. It is widely used in applications where a constant frequency is needed, such as in radio broadcast systems, servo motors, oscilloscopes, and noise reduction systems. By adjusting the values of the components, a range of frequencies from 1 nanosecond to 16 megahertz can be produced.

The specific data is subject to PDF, and the above content is for reference