Allicdata Part #: | CB3-2I-12M2880-ND |
Manufacturer Part#: |
CB3-2I-12M2880 |
Price: | $ 0.74 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | CTS-Frequency Controls |
Short Description: | OSC XO 12.288MHZ HCMOS TTL SMD |
More Detail: | 12.288MHz XO (Standard) HCMOS, TTL Oscillator 5V E... |
DataSheet: | CB3-2I-12M2880 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.66944 |
Frequency Stability: | ±100ppm |
Current - Supply (Disable) (Max): | 10µA |
Height - Seated (Max): | 0.071" (1.80mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 25mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | CB3 |
Voltage - Supply: | 5V |
Output: | HCMOS, TTL |
Function: | Enable/Disable |
Frequency: | 12.288MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators have been an integral part of the commercial and industrial electronics industry since their development over a century ago. They are used to generate synchronized signals and to enable communication, control, and data processing across a wide variety of devices and applications. The CB3-2I-12M2880 oscillator is one such device, widely used in industrial applications and in many areas of research. This article will briefly discuss the application field and working principle of the CB3-2I-12M2880 oscillator.
The CB3-2I-12M2880 oscillator is a type of voltage-controlled oscillator (VCO) which incorporates a standard oscillator circuit alongside an electronic voltage input. This input can be used to vary the frequency and amplitude of the output signal, allowing for a great degree of control and customization in its application. It is commonly used in the construction of digital hardware, such as gate arrays, CPUs, and logic integration circuits. Furthermore, it is also used in frequency-control systems such as in radio-frequency signal transceivers, in which it is responsible for synthesizing frequency sets. Given its broad range of application fields, the CB3-2I-12M2880 oscillator is a vital component in many different industrial and commercial applications.
The working principle of the CB3-2I-12M2880 oscillator is based on a type of phase-locked loop (PLL) configuration, which consists of an oscillator, a phase detector, and a frequency divider. At the core of the oscillator is a voltage-controlled oscillator (VCO) whose output waveform is a square wave which is self-synchronizing with the input voltage. This waveform is fed through a phase detector which compares the phase of the VCO output with the input voltage. As a result, any deviation in the phases of the waveforms is detected and adjusted, allowing for the signal to remain in sync with the input voltage. The phase-locked loop is then connected to a frequency divider, which breaks down the oscillator\'s output waveform into a weaker frequency and sends it to the output for use in the desired application.
All in all, the CB3-2I-12M2880 oscillator is a versatile device which has a wide range of applications in the industrial and commercial electronics industry. Its voltage-controlled characteristics allow for frequency and amplitude control, while its phase-locked loop configuration enables precision control over the output waveform. As such, it is an essential component in digital hardware, frequency-control systems, and in many other areas of research and development.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...