Allicdata Part #: | CB3-3I-19M6608-ND |
Manufacturer Part#: |
CB3-3I-19M6608 |
Price: | $ 0.74 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | CTS-Frequency Controls |
Short Description: | OSC XO 19.6608MHZ HCMOS TTL SMD |
More Detail: | 19.6608MHz XO (Standard) HCMOS, TTL Oscillator 5V ... |
DataSheet: | CB3-3I-19M6608 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.66944 |
Frequency Stability: | ±50ppm |
Current - Supply (Disable) (Max): | 10µA |
Height - Seated (Max): | 0.071" (1.80mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 25mA |
Operating Temperature: | -40°C ~ 85°C |
Series: | CB3 |
Voltage - Supply: | 5V |
Output: | HCMOS, TTL |
Function: | Enable/Disable |
Frequency: | 19.6608MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators are a type of electrical circuit that generates repeating signals. The CB3-3I-19M6608 is an oscillator that is designed for stability, minimal power consumption with maximum performance. It is a high-end oscillator with low ripple and good rise / fall times.
The CB3-3I-19M6608 oscillator has a number of applications, ranging from industrial to medical. It is a 50 MHz oscillator, making it suitable for high speed data transfer, high frequency communication systems and precision sensors. It can also offer good very low noise operation for medical imaging and life support systems. In addition, it is used in a wide range of embedded projects that require a stable oscillator that can offer high performance at low power consumption.
The CB3-3I-19M6608 is a single chip oscillator with an integrated power amplifier. The integrated amplifier offers good noise rejection and low peak to peak ripple, due to its high signal to noise ratio. The power amplifier in the oscillator is able to drive the output signal up to 30µH. The frequency of the oscillator is also adjustable, allowing it to be tuned to the desired frequency.
The working principle of the CB3-3I-19M6608 oscillator is based on a classic oscillator circuit, where two different nodes are connected. A voltage source is connected to both of the nodes, and each node is coupled to a resistor. As the voltage source is grounded, current can flow from the voltage source to one of the nodes. This current then flows to the other node, and the output is generated between the two nodes. As the current flows back and forth between the two nodes, an oscillating signal is created.
The CB3-3I-19M6608 oscillator also includes a temperature compensation circuit that helps to provide a stable output even under varying temperature conditions. This helps to ensure accurate and consistent results over time. The output of the oscillator is also protected against high frequency noise and interference, allowing for a clean and reliable signal.
In conclusion, the CB3-3I-19M6608 is a high performance, low power oscillator with excellent stability and low ripple characteristics. It has a number of applications in industrial and medical applications, and is also suitable for embedded projects. The working principle of the oscillator is based on a classic oscillation circuit, and the temperature compensation circuit helps to provide a stable output over varying temperature conditions. The output of the oscillator is also protected against high frequency noise and interference, providing reliable and consistent results.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...