CC-WMX-LD79-VK-B Allicdata Electronics
Allicdata Part #:

CC-WMX-LD79-VK-B-ND

Manufacturer Part#:

CC-WMX-LD79-VK-B

Price: $ 2.77
Product Category:

RF/IF and RFID

Manufacturer: Digi International
Short Description: RF TXRX MODULE WIFI U.FL ANT
More Detail: N/A
DataSheet: CC-WMX-LD79-VK-B datasheetCC-WMX-LD79-VK-B Datasheet/PDF
Quantity: 1000
2 +: $ 2.52000
Stock 1000Can Ship Immediately
$ 2.77
Specifications
Serial Interfaces: Ethernet, I²C, I²S, JTAG, SPI, SDIO, UART, USB
Package / Case: Module
Operating Temperature: -40°C ~ 85°C
Mounting Type: Chassis Mount
Current - Transmitting: 700mA
Current - Receiving: 700mA
Voltage - Supply: 3.75V
Memory Size: 512MB Flash, 1GB RAM
Utilized IC / Part: --
Antenna Type: Not Included, U.FL
Series: ConnectCore® Wi-i.MX53
Sensitivity: -94dBm
Power - Output: 17dBm
Data Rate: 65Mbps
Frequency: 2.4GHz, 5GHz
Modulation: 16QAM, 64QAM, BPSK, CCK, DBPSK, DQPSK, QPSK
Protocol: 802.11a/b/g/n
RF Family/Standard: WiFi
Part Status: Active
Packaging: Bulk 
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF transceiver modules are an indispensable component in modern communications systems. The CC-WMX-LD79-VK-B is one such module that has specific applications and works on a certain principle.

The CC-WMX-LD79-VK-B is a potted and packaged module that is optimized for operation in the 902-927 MHz band. It is designed for applications such as wireless point-of-sale (POS) terminals, home alarm systems, access control systems, commercial radio systems, and other wireless applications. It operates in a low-power environment and requires minimal power. The module offers a range of options to adjust the output of the transceiver according to the application including power on/off, power save, and frequency hopping.

The transceiver on the CC-WMX-LD79-VK-B consists of both transmitter and receiver and is capable of transmitting data up to 1.2 Kbps. It also includes a low-noise amplifier (LNA) to boost the signal strength so it can travel greater distances. It operates on a frequency hopping spread spectrum (FHSS) protocol to minimize the effect of interference or signal interference on the transmission. The module also includes a PLL (Phase Lock Loop) to lock on a specific frequency so that the frequency of the transmission does not change. The power of the module is adjustable to meet specific output requirements.

To maximize the performance of the module, the transceiver utilizes an efficient power-saving technique that enables it to remain in a power-saving state while the receiver is idle. This means that the module does not consume as much power when not in use but still enjoys the high performance of the receiver. The module is equipped with a fully integrated clock generator to ensure that there is no delay in the data transmission. The module is FCC and CE approved for wireless transmissions, and has a maximum range of up to a few hundred meters.

Overall, the CC-WMX-LD79-VK-B is a highly reliable and efficient module for applications that need to receive and transmit data of up to 1.2 Kbps. It is designed to overcome the complexities of interference and is optimized to operate in the 902-927 MHz band. Its integrated features and capabilities make it an ideal and cost-effective solution for wireless applications.

The specific data is subject to PDF, and the above content is for reference

Latest Products
BMD-300-B-R

2.4GHz transceiver, 64MHz Arm Cortex M4F...

BMD-300-B-R Allicdata Electronics
109990050

ENET-ZBP113 ZIGBEE MODULE

109990050 Allicdata Electronics
RM024-S50-C-01

RF TXRX MODULE ISM>1GHZ U.FL ANT

RM024-S50-C-01 Allicdata Electronics
ISM43341-M4G-L44-U

RF TXRX MOD BLUETOOTH/WIFI U.FL

ISM43341-M4G-L44-U Allicdata Electronics
MTSMC-C2-GP-N2-SP

RF TXRX MOD CELLULAR/NAV U.FL

MTSMC-C2-GP-N2-SP Allicdata Electronics
DNT90MP

RF TXRX MODULE ISM ...

DNT90MP Allicdata Electronics