CC6-1203SF-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC/DC converters are devices that use electrical energy to provide a DC output voltage from a DC input voltage. CC6-1203SF-E is a two-terminal integrated circuit (IC) DC/DC converter. It provides an isolated output voltage from an input voltage. It features a single chip, low voltage, wide input voltage range, and high efficiency.

The CC6-1203SF-E is available in a compact surface-mount package and is optimized for applications that require low power and high efficiency such as computer peripherals, instrumentation and medical equipment, industrial controls, sensor and communication systems. It is suitable for applications operating from a low input voltage to 400 VDC.

It is designed to accept a wide input supply voltage range of 1.8 V to 20 V and provide a regulated output voltage of 3 V pin selectable at 6 V. It can also be used as a step-up or step-down converter depending on its input and output voltage. Its minimized power loss is achieved by utilizing a peak current mode control principle, which allows the converters to have high efficiency under a wide range of line and load conditions.

The output current is internally limited by an integrated overcurrent protection circuit, which also provides an indication of fault conditions. The CC6-1203SF-E has a low start up current, typically less than 5 mA. It has a low quiescent current of typically 40 μA, so it can remain enabled with minimal power dissipation when no load is present.

The CC6-1203SF-E’s external components are few, making it advantageous for applications in low cost, high performance and low power applications. The use of the IC reduces board space due to its small form factor, and the elimination of bulky external components increases the overall efficiency and system power density of the resulting power system. In addition, it can be used with a wide variety of external components, such as capacitors, inductors, transformers, transistors and diodes, making it possible to realize a wide range of power conditions.

In summary, CC6-1203SF-E is a two-terminal integrated circuit (IC) DC/DC converter. It provides an isolated output voltage from an input voltage. It is suitable for applications operating from a low input voltage to 400 VDC. It has a low start up current, typically less than 5 mA, and a low quiescent current of typically 40 μA. Its minimized power loss is achieved by utilizing a peak current mode control principle. It has few external components, making it advantageous for applications in low cost, high performance and low power applications.

The specific data is subject to PDF, and the above content is for reference