Allicdata Part #: | 445-3287-ND |
Manufacturer Part#: |
CC6-4805SF-E |
Price: | $ 11.06 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | TDK-Lambda Americas Inc. |
Short Description: | CONV DC/DC 6W SNGL 48V 5V PCB |
More Detail: | Isolated Module DC DC Converter 1 Output 5V 1.2... |
DataSheet: | CC6-4805SF-E Datasheet/PDF |
Quantity: | 1918 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | $ 10.05480 |
10 +: | $ 9.60750 |
Voltage - Output 3: | -- |
Control Features: | Enable, Active Low |
Size / Dimension: | 0.90" L x 0.83" W x 0.34" H (22.9mm x 21.1mm x 8.5mm) |
Package / Case: | 7-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | -- |
Operating Temperature: | -40°C ~ 85°C |
Features: | -- |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 500V |
Power (Watts): | 6W |
Current - Output (Max): | 1.2A |
Series: | CC-E |
Voltage - Output 2: | -- |
Voltage - Output 1: | 5V |
Voltage - Input (Max): | 76V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are devices used to convert direct current (DC) from one voltage level to another. The CC6-4805SF-E is a DC-DC converter designed to convert 12 volts to 5 volts. It is designed to be used in applications where there is a need to power 5 volts electronics from a power source with a much higher voltage. This converter is designed to be small in size and efficient in its energy use.
The CC6-4805SF-E is a non-isolated buck-boost converter. A buck-boost converter is designed to allow the input voltage to be stepped up or stepped down to the desired level. The non-isolated aspect of this converter means that the input and output are not electrically isolated, so the output voltage is not independent of the input voltage. The input voltage of the CC6-4805SF-E must be between 7 volts and 16 volts.
The working principle of the CC6-4805SF-E is relatively simple. The device utilizes two switching transistors to act as a switch to regulate the voltage flowing from the input to the output. When the switch is open, no voltage flows through the circuit. When the switch is closed, voltage flows through the circuit. When the switch is opened and closed with a certain frequency, an average voltage appears at the output. By controlling the frequency and duty cycle (ratio of ON vs OFF time), the output voltage can be controlled.
The CC6-4805SF-E is designed to be used in telecommunications, automotive, mobile and consumer applications. The converter is designed to be small and efficient, making it a great choice for embedded systems and portable electronics where size and energy consumption are important factors. It is also designed to be highly reliable, so it is an ideal choice for critical applications such as medical equipment and vehicles.
In conclusion, the CC6-4805SF-E is a DC-DC converter designed to convert 12 volts to 5 volts. It is a non-isolated buck-boost converter, which means that the output voltage is not independent of the input voltage. The working principle of the CC6-4805SF-E is based on controlling the frequency and duty cycle of two switching transistors. The device is designed to be small and efficient, making it a great choice for embedded systems and portable electronics where size and energy consumption are important. It is also designed to be highly reliable, so it is an ideal choice for critical applications such as medical equipment and vehicles.
The specific data is subject to PDF, and the above content is for reference
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...