CD19FD222GO3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Mica and PTFE capacitors are comprised of two dielectric materials whose electrical characteristics are quite different from each other. These types of capacitors are found in many applications, and the CD19FD222GO3 is one of the most widely used. This capacitor is designed to provide high capacitance per unit volume and is used for filters, high frequency circuits, and voltage regulation.

The CD19FD222GO3 is a two-layer capacitor with an outer layer of mica and an inner layer of polytetrafluoroethylene (PTFE). An external wire is connected to each of the layers. The combination of mica and PTFE creates an optimized compromise of both dielectric properties, which makes them ideal for both high frequency and high voltage applications.

The dielectric constant of mica is much higher than that of PTFE, resulting in high capacitance. Mica also has a high dielectric strength relative to PTFE, which makes it suitable for applications that have high current flow. PTFE has a low dielectric constant, but it has a higher dielectric strength than mica, which makes it useful in high voltage applications. The combination of mica and PTFE yields a capacitor with high capacitance and high voltage ratings.

The CD19FD222GO3 has a rated voltage of 10kV and a maximum current rating of 10A. It is a non-polarized capacitor, meaning there is no need to worry about electrical polarity when integrating it into a circuit. The capacitor is typically mounted onto a printed circuit board with two solder terminals and is encased in a small plastic enclosure for protection. It has a low equivalent series resistance (ESR), similar to that of electrolytic capacitors, which makes it efficient in frequency circuits with higher ripple currents.

The working principle behind a capacitor is based on the electrical storage of charge. When the capacitor is connected to a power supply, a current flows through the electrodes, which builds up a charge on the plates. This charge is stored on the plates until the current is removed; the stored charge can then be discharged. By varying the plate area, the capacitance and voltage ratings can be adjusted.

The CD19FD222GO3 is a versatile capacitor that can be used in a wide variety of applications. It is ideal for DC-DC converter circuits, and it can be used for snubber circuits as well as high-frequency filtering. It also has a low dissipation factor and a dielectric absorption ratio of less than 1%, making it suitable for many applications. Its combination of high capacitance and high voltage ratings makes it a popular choice for many industrial and consumer products.

The specific data is subject to PDF, and the above content is for reference