CD4071BM96G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic gates are electronic components that receive binary inputs, perform a specified logical operation, and then produce a single binary output, which represents the result of the operation. The CD4071BM96G4 is a hex non-inverting buffer. The device has an open drain output and can be connected to other open drain outputs to implement active-low wired-OR and active-high wired-AND functions.

An application field of the CD4071BM96G4 is in computer networking and communication, where the buffers are used to drive signals off of the main bus to the peripheral, and from the peripheral back to the main bus. In this embodiment, the buffers switch high and low, or vice versa, depending on the logic input.

The CD4071BM96G4 can also be used in peripheral controllers, in which the buffers can be used to drive signals to and from various register files. Additionally, the CD4071BM96G4 can be employed as a logic gate in a logic circuit, where the output is either a high or low state depending on the input condition.

The CD4071BM96G4 has two distinct working principles. The first is as an open drain buffer, in which the output is active-low if it is exposed to its active-low logic input. The second is as an inverting buffer, in which the output is active-low if the logic input is active-low, and active-high if the logic input is active-high.

The open drain buffer is beneficial in that it does not consume power when the output is in a low state, because only the output is switched on and off as opposed to the entire device. The open drain buffer also does not produce a continuous current when the output is in a high state. The open-drain buffer is useful for applications where the current draw needs to be minimized.

The inverting buffer is important for applications that require the logic state of an output to be inverted from its input. In this case, the output will be active-high if the logic input is active-low and active-low if the logic input is active-high. This is especially useful for implementing control logic in certain applications that require the output to be in the opposite logic state from the input.

The CD4071BM96G4 is a useful logic component for a wide range of applications. It has an open drain output that can be used to implement active-low wired-OR and active-high wired-AND functions. Additionally, it can be used as an open drain buffer, or as an inverting buffer in order to invert the logic state of an output relative to its input. With its wide range of applications, the CD4071BM96G4 is an important addition to any logic circuit designer’s toolkit.

The specific data is subject to PDF, and the above content is for reference