CD74ACT541M96G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The CD74ACT541M96G4 is a quad buffer/driver of the 74ACT logic family supplied in a thin shrink-small-outline package (TSSOP). It is one of the most commonly used logic buffers, drivers, receivers, and transceivers. This paper will discuss the application field and operating principle of the CD74ACT541M96G4.

The CD74ACT541M96G4 is a buffering and driving device used in applications where high fan-out loads or low output currents must be driven. This device is especially useful for driving a high number of inputs or combinations of outputs for IC designs operating in low current conditions and/or high capacitive loads. It operates up to a frequency of 40 MHz, making it well-suited for high-speed applications.

This device can be used in a variety of applications. It is often used in digital systems, such as bus and interface systems, lower-power buses, and communication systems. It is also used in wired and wireless communication systems, controller systems, drive transistor circuits, and programmable logic controllers (PLCs).

The CD74ACT541M96G4 is a noninverting buffer/driver with high fan-out and low output current. It buffers and drives multiple loads with a single fan-out buffer. It features full logic swing at ratiometric power supply voltage ranges. It has an open-drain output that can be used to selectively, depending on the logic function, either reduce the current load or provide additional drive current, making it a versatile device for multiple applications.

The CD74ACT541M96G4 is a CMOS-based device that uses a unique transistor-level circuit to achieve high fan-out and low output current. It uses a pair of PMOS and NMOS transistors connected in series, with the source of each transistor connected to the drain of the other. This arrangement causes the source of one transistor to be connected to the negative supply rail and the source of the other to remain connected to the positive supply rail, forming an open-drain configuration. This allows the transistor pair to sink large amounts of current while driving the output voltage to either rail.

The input of the device is connected to two CMOS inverters, one inverter connected to the positive supply rail and the other to the negative supply rail. When the input voltage is at a logic high level, the positive supply rail is weakly pulled up, while the negative supply rail is weakly pulled down. This causes the output of the inverters to become high and low respectively, switching the transistor pair off and on. This results in the output of the device becoming either high or low, depending on the input level.

The output of the device also includes a diode connection between the output and the positive supply rail, which helps to reduce the power consumption of the device. This diode connection decreases the amount of current passing through the output when the output voltage is low and decreases the turn-on time of the output transistors, thus reducing the overall power dissipation of the device.

The CD74ACT541M96G4 is a highly useful device for low-power systems, digital systems, and communication systems. It provides a high level of performance, while avoiding high power dissipation. Its application fields make it a versatile and attractive choice for system designers.

The specific data is subject to PDF, and the above content is for reference