CD74HC08PW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A CD74HC08PW is an integrated circuit chip that is part of the logic gates and inverter class of devices. It is a perfectly matched, quad two-inputs only, AND gates with current limiting resistors on all inputs. The chip has two active low enable inputs, E1− and E2−, and a common active-low, output enable input, E3−. These enable inputs force the output signals to the high-impedance state when in the active-low state, independent from the logic state of the inputs.

The CD74HC08PW is based on CMOS process technology and therefore is suitable for operation from supply voltages ranging from 3 V to 18 V with no increase in power consumption. It is most often used in consumer and commercial electronics, particularly for switching purposes. It offers fast switching times and better noise immunity when compared to other logic gate and inverter types.

Generally, the CD74HC08PW finds application in a variety of consumer and commercial devices and circuits. It is often used in embedded systems, motor control, consumer electronics, automotive systems, medical devices, security systems, and many other devices and systems. This device is primarily capable of two functions: logic replication and signal isolation.

In logic replication mode, two signal inputs are combined to create a single logic output. This can be in either "AND" mode where both input signals must be active, or "OR" mode where either signal can be active. As an example, the CD74HC08PW can be used to create a circuit to detect when either of two switches are closed. The combined circuit then output a single signal that indicates when either switch is closed.

In signal isolation mode, the presence or absence of a single input signal can be used to power-up a logic circuit or any other circuitry connected to the output. In this mode the output state will depend upon the logic state of the input. In other words, if the input signal is high, the output will be activated, and if the input signal is low, the output will be inactive.

The working principle of the CD74HC08PW involves the ability of the chip to take inputs, perform logical operations on them, and output the result. The chip understands inputs as either being high or low. A high or active signal is generally represented by some voltage between VDD and a ground, while a low or inactive signal is generally represented by a voltage close to ground. The AND gate is a type of Boolean logic gate which takes two or more signals as inputs and performs a logical AND operation. The output of this gate is only high if both inputs are high.

The internal construction of the CD74HC08PW consists of four separate logic gates, which are all based on CMOS transistors. Each logic gate has two input pins that feed into an internal circuit where a logical AND operation is performed. The output of this circuit is then fed into the output pin of the chip.

The main advantage of the CD74HC08PW is its low power consumption (only slightly higher than that of a CD74F08PW), the wide range of supply voltage from 3 volts to 18 volts, the speed of operation, and the robust design. It is perfect for situations where low power and speed are of importance, because it features a very low current drain at normal supply voltages and is able to operate within its specified limits at frequencies up to 10 MHz.

In conclusion, the CD74HC08PW is a versatile quad two-input only, AND gates with current limiting resistors on all inputs. Its ability to perform logical operations on inputs, its low power consumption, wide supply voltage range, and high speed make it an attractive device for a variety of applications. It is an ideal choice for use in embedded systems, motor control, consumer electronics, automotive systems, medical devices, security systems, and many other applications.

The specific data is subject to PDF, and the above content is for reference